PIC10F220 データシートの表示（PDF） - Microchip Technology

部品番号

コンポーネント説明

メーカー

PIC10F220

High-Performance Microcontrollers with 8-bit A/D

Microchip Technology 

PIC10F220/222

4.3 Data Memory Organization

Data memory is composed of registers or bytes of

RAM. Therefore, data memory for a device is specified

by its register file. The register file is divided into two

functional groups: Special Function Registers (SFR)

and General Purpose Registers (GPR).

The Special Function Registers include the TMR0 reg-

ister, the Program Counter (PCL), the STATUS register,

the I/O register (GPIO) and the File Select Register

(FSR). In addition, Special Function Registers are used

to control the I/O port configuration and prescaler

options.

The General Purpose Registers are used for data and

control information under command of the instructions.

For the PIC10F220, the register file is composed of 9

Special Function Registers and 16 General Purpose

Registers (Figure 4-3, Figure 4-4).

For the PIC10F222, the register file is composed of 9

Special Function Registers and 23 General Purpose

Registers (Figure 4-4).

4.3.1

GENERAL PURPOSE REGISTER

FILE

The General Purpose Register file is accessed, either

directly or indirectly, through the File Select Register

(FSR). See Section 4.9 “Indirect Data Addressing;

INDF and FSR Registers”.

FIGURE 4-3:

PIC10F220 REGISTER

FILE MAP

File Address

00h

INDF(1)

01h

TMR0

02h

PCL

03h

STATUS

04h

FSR

05h

OSCCAL

06h

GPIO

07h

ADCON0

08h

ADRES

09h

Unimplemented(2)

0Fh

10h

General

Purpose

Registers

1Fh

Note 1: Not a physical register. See Section 4.9

“Indirect Data Addressing; INDF and

FSR Registers”.

2: Unimplemented, read as 00h.

FIGURE 4-4:

File Address

00h

01h

02h

03h

04h

05h

06h

07h

08h

09h

PIC10F222 REGISTER

FILE MAP

INDF(1)

TMR0

PCL

STATUS

FSR

OSCCAL

GPIO

ADCON0

ADRES

General

Purpose

Registers

1Fh

Note 1: Not a physical register. See Section 4.9

“Indirect Data Addressing; INDF and

FSR Registers”.

4.3.2 SPECIAL FUNCTION REGISTERS

The Special Function Registers (SFRs) are registers

used by the CPU and peripheral functions to control the

operation of the device (Table 4-1).

The Special Function Registers can be classified into

two sets. The Special Function Registers associated

with the “core” functions are described in this section.

Those related to the operation of the peripheral

features are described in the section for each

peripheral feature.

DS41270E-page 14

© 2007 Microchip Technology Inc.

Share Link: