SPT7710(2001) データシートの表示（PDF） - Signal Processing Technologies

部品番号

コンポーネント説明

メーカー

SPT7710
(Rev.:2001)

8-BIT, 150 MSPS, FLASH A/D CONVERTER

Signal Processing Technologies 

ELECTRICAL SPECIFICATIONS

TA= TMIN to TMAX, VEE=–5.2 V, RSource=50 Ω, VRBF=–2.00 V, VR2=–1.00 V, VRTF=0.00 V, ƒCLK=125 MHz, Duty Cycle=50%, unless otherwise specified.

PARAMETERS

TEST

TEST

SPT7710A

CONDITIONS LEVEL MIN TYP MAX

SPT7710B

MIN TYP MAX UNITS

Digital Inputs

Digital Input High Voltage

(MINV, LINV)

Digital Input Low Voltage

(MINV, LINV)

Clock Low Width, tPWL

Clock High Width, tPWH

Digital Outputs

Digital Output High Voltage

Digital Output Low Voltage

Power Supply Requirements

Supply Current

Power Dissipation

50 Ω to –2 V

50 Ω to –2 V

+25 °C

+25 °C

VI

–1.1

VI

–2.0

VI

VI

–0.7

–1.1

–1.5

–2.0

4

5

4

5

–0.7 Volts

–1.5 Volts

4

5 ns

4

5 ns

VI

–1.1

VI

–1.1

–1.5

Volts

–1.5 Volts

VI

425 550

425 550 mA

VI

2.2 2.9

2.2

2.9 W

TEST LEVEL CODES

All electrical characteristics are subject to the

following conditions:

All parameters having min/max specifications

are guaranteed. The Test Level column indi-

cates the specific device testing actually per-

formed during production and Quality Assur-

ance inspection. Any blank section in the data

column indicates that the specification is not

tested at the specified condition.

Unless otherwise noted, all test are pulsed

tests; therefore, TJ = TC = TA.

LEVEL

I

II

III

IV

V

VI

TEST PROCEDURE

100% production tested at the specified temperature.

100% production tested at TA = +25 °C, and sample tested at the

specified temperatures.

QA sample tested only at the specified temperatures.

Parameter is guaranteed (but not tested) by design and characteri-

zation data.

Parameter is a typical value for information purposes only.

100% production tested at TA = +25 °C. Parameter is guaranteed

over specified temperature range.

SPT

3

SPT7710

8/17/01

Share Link: