28F002BV データシートの表示（PDF） - Intel

部品番号

コンポーネント説明

メーカー

28F002BV

2-MBIT SmartVoltage BOOT BLOCK FLASH MEMORY FAMILY

Intel 

2-MBIT SmartVoltage BOOT BLOCK FAMILY

E

4.0 ELECTRICAL SPECIFICATIONS

4.1 Absolute Maximum Ratings*

Commercial Operating Temperature

During Read .............................. 0 °C to +70 °C

During Block Erase

and Word/Byte Program ............ 0 °C to +70 °C

Temperature Under Bias ....... –10 °C to +80 °C

Extended Operating Temperature

During Read .......................... –40 °C to +85 °C

During Block Erase

and Word/Byte Program ........ –40 °C to +85 °C

Temperature Under Bias ....... –40 °C to +85 °C

Storage Temperature................. –65 °C to +125 °C

Voltage on Any Pin

(except VCC, VPP, A9 and RP#)

with Respect to GND ........... –2.0 V to +7.0 V(2)

Voltage on Pin RP# or Pin A9

with Respect to GND ....... –2.0 V to +13.5 V(2,3)

VPP Program Voltage with Respect

to GND during Block Erase

and Word/Byte Program .. –2.0 V to +14.0 V(2,3)

VCC Supply Voltage

with Respect to GND ........... –2.0 V to +7.0 V(2)

Output Short Circuit Current....................100 mA (4)

NOTICE: This datasheet contains preliminary information on

new products in production. Do not finalize a design with

this information. Revised information will be published when

the product is available. Verify with your local Intel Sales

office that you have the latest datasheet before finalizing a

design.

* WARNING: Stressing the device beyond the "Absolute

Maximum Ratings" may cause permanent damage. These

are stress ratings only. Operation beyond the "Operating

Conditions" is not recommended and extended exposure

beyond the "Operating Conditions" may effect device

reliability.

NOTES:

1. Operating temperature is for commercial product

defined by this specification.

2. Minimum DC voltage is –0.5 V on input/output pins.

During transitions, this level may undershoot to –2.0 V

for periods

<20 ns. Maximum DC voltage on input/output pins is

VCC + 0.5 V which, during transitions, may overshoot to

VCC + 2.0 V for periods <20 ns.

3. Maximum DC voltage on VPP may overshoot to +14.0 V

for periods <20 ns. Maximum DC voltage on RP# or A9

may overshoot to 13.5 V for periods <20 ns.

4. Output shorted for no more than one second. No more

than one output shorted at a time.

4.2 Commercial Operating Conditions

Symbol

Table 10. Commercial Temperature and VCC Operating Conditions

Parameter

Notes

Min

Max

Units

TA

Operating Temperature

0

+70

°C

VCC

3.3 V VCC Supply Voltage (± 0.3 V)

3.0

3.6

Volts

5 V VCC Supply Voltage (10%)

1

4.50

5.50

Volts

5 V VCC Supply Voltage (5%)

2

4.75

5.25

Volts

NOTES:

1. 10% VCC specifications apply to the 60 ns, 80 ns and 120 ns product versions in their standard test configuration.

2. 5% VCC specifications apply to the 60 ns version in its high-speed test configuration.

28

SEE NEW DESIGN RECOMMENDATIONS

Share Link: