PSD913G2V-A-15M データシートの表示（PDF） - STMicroelectronics

部品番号

コンポーネント説明

メーカー

PSD913G2V-A-15M

Configurable Memory System on a Chip for 8-Bit Microcontrollers

STMicroelectronics 

PSD935G2

2.0

Key Features

PSD9XX Family

t A simple interface to 8-bit microcontrollers that use either multiplexed or

non-multiplexed busses. The bus interface logic uses the control signals generated by

the microcontroller automatically when the address is decoded and a read or write is

performed. A partial list of the MCU families supported include:

• Intel 8031, 80196, 80188, 80C251

• Motorola 68HC11 and 68HC16

• Philips 8031 and 80C51XA

• Zilog Z80, Z8 and Z180

• Infineon C500 family

t 4 Mbit Flash memory. This is the main Flash memory. It is divided into eight

equal-sized blocks that can be accessed with user-specified addresses.

t Internal secondary 256 Kbit Flash boot memory. It is divided into four equal-sized

blocks that can be accessed with user-specified addresses. This secondary memory

brings the ability to execute code and update the main Flash concurrently.

t 64 Kbit SRAM. The SRAM’s contents can be protected from a power failure by

connecting an external battery.

t General Purpose PLD (GPLD) with 24 outputs. The GPLD may be used to implement

external chip selects or combinatorial logic function.

t Decode PLD (DPLD) that decodes address for selection of internal memory blocks.

t 52 individually configurable I/O port pins that can be used for the following functions:

• MCU I/Os

• PLD I/Os

• Latched MCU address output

• Special function I/Os.

• I/O ports may be configured as open-drain outputs.

t Standby current as low as 50 µA for 5 V devices.

t Built-in JTAG compliant serial port allows full-chip In-System Programmability (ISP).

With it, you can program a blank device or reprogram a device in the factory or the field.

t Internal page register that can be used to expand the microcontroller address space

by a factor of 256.

t Internal programmable Power Management Unit (PMU) that supports a low power

mode called Power Down Mode. The PMU can automatically detect a lack of

microcontroller activity and put the PSD9XX into Power Down Mode.

t Erase/Write cycles:

• Flash memory – 100,000 minimum

• PLD – 1,000 minimum

3.0 PSD9XX

Series

Table 1. PSD9XX Product Matrix

Part #

PSD9XX

Series

Device

Flash

Flash

Main

Boot

Serial ISP Memory Memory

I/O PLD Input

Output PLD JTAG/ISP Kbit

Kbit

SRAM

Pins Inputs Macrocells Macrocells Outputs Port 8 Sectors (4 Sectors) Kbit

PSD935G2 52 66

24

Yes

4096

256

64

PSD9XX PSD913G2 27 57

19

Yes

1024

256

16

PSD934F2

27 57

19

Yes

2048

256

64

Supply

Voltage

5V

5V

5V

3

Share Link: