RF3163 データシートの表示（PDF） - RF Micro Devices
部品番号
コンポーネント説明
メーカー
RF3163 Datasheet PDF : 10 Pages
| |||
RF3163
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Pkg
Base
Function
NC
VREG
VMODE
RF IN
VCC1
NC
NC
GND
VCC2
VCC2
VCC2
RF OUT
NC
NC
NC
NC
GND
Description
Interface Schematic
No connection. Do not connect this pin to any external circuit.
Regulated voltage supply for amplifier bias circuit. In power down mode,
both VREG and VMODE need to be LOW (<0.5V).
For nominal operation (High Power mode), VMODE is set LOW. When set
HIGH, devices are biased lower to improve efficiency.
RF input internally matched to 50Ω. This input is internally AC-coupled.
First stage collector supply. A 2200pF and 4.7μF decoupling capacitor are
required.
No connection. Do not connect this pin to any external circuit.
No connection. Do not connect this pin to any external circuit.
Ground connection.
Output stage collector supply. Please see the schematic for required exter-
nal components.
Same as pin 9.
Same as pin 9.
RF output. Internally AC-coupled.
No connection. Do not connect this pin to any external circuit.
No connection. Do not connect this pin to any external circuit.
No connection. Do not connect this pin to any external circuit.
No connection. Do not connect this pin to any external circuit.
Ground connection. The backside of the package should be soldered to a
top side ground pad which is connected to the ground plane with multiple
vias. The pad should have a short thermal path to the ground plane.
Pin 1 ID
Package Drawing
3.00
1.45
A
Pin 1 ID
3.00
1.45
0.15 C
2 PLCS
0.15 C
2 PLCS
B
0.203 REF
00..4200TYP
0.10 M C A B
0.08 C
0.925
0.775
0.102 REF
C
Shaded areas represent pin 1. Dimensions in mm.
00..2188TYP
0.05
0.50 TYP
0.08 C
4 of 10
7628 Thorndike Road, Greensboro, NC 27409-9421 · For sales or technical
support, contact RFMD at (+1) 336-678-5570 or sales-support@rfmd.com.
Rev A5 DS060504
Share Link: 