CY7C4241-10JI データシートの表示（PDF） - Cypress Semiconductor
部品番号
コンポーネント説明
メーカー
CY7C4241-10JI Datasheet PDF : 20 Pages
| |||
CY7C4421/4201/4211/4221
CY7C4231/4241/4251
Maximum Ratings[4]
Exceeding maximum ratings may shorten the useful life of the
device. User guidelines are not tested.
Storage Temperature ................................... –65°C to +150°C
Ambient Temperature with
Power Applied .............................................. –55°C to +125°C
Supply Voltage to Ground Potential................–0.5V to +7.0V
DC Voltage Applied to Outputs
in High-Z State................................................–0.5V to +7.0V
DC Input Voltage ............................................–3.0V to +7.0V
Electrical Characteristics Over the Operating Range
Output Current into Outputs (LOW)............................. 20 mA
Static Discharge Voltage........................................... > 2001V
(per MIL-STD-883, Method 3015)
Latch up Current..................................................... > 200 mA
Operating Range
Range
Commercial
Industrial[5]
Ambient Temperature
0°C to +70°C
–40°C to +85°C
VCC
5V ±10%
5V ±10%
Parameter
Description
Test Conditions
-10
-15
-25
Unit
Min Max Min Max Min Max
VOH
VOL
VIH
VIL
IIX
IOS[6]
IOZL
IOZH
ICC1[7]
ICC2[8]
Output HIGH Voltage
Output LOW Voltage
Input HIGH Voltage
Input LOW Voltage
VCC = Min.,
IOH = –2.0 mA
VCC = Min.,
IOL = 8.0 mA
2.4
2.4
2.4
V
0.4
0.4
0.4
V
2.2
VCC
2.2
VCC
2.2
VCC
V
–3.0 0.8 –3.0 0.8 –3.0 0.8
V
Input Leakage
Current
VCC = Max.
–10
+10
–10
+10
–10
+10
μA
Output Short
Circuit Current
Output OFF,
High-Z Current
Active Power Supply
Current
VCC = Max.,
VOUT = GND
–90
–90
–90
mA
OE > VIH,
VSS < VO < VCC
–10 +10 –10 +10 –10 +10 mA
Commercial
35
35
35
mA
Industrial
40
40
40
mA
Average Standby Current
Commercial
10
10
10
mA
Industrial
15
15
15
mA
Capacitance[9]
Parameter
Description
CIN
COUT
Input Capacitance
Output Capacitance
Test Conditions
TA = 25°C, f = 1 MHz,
VCC = 5.0V
Max
Unit
5
pF
7
pF
Notes
4. The voltage on any input or I/O pin cannot exceed the power pin during power up.
5. TA is the “instant on” case temperature.
6. Test no more than one output at a time for not more than one second.
7. Outputs open. Tested at frequency = 20 MHz.
8. All inputs = VCC – 0.2V, except WCLK and RCLK, which are switching at 20 MHz.
9. Tested initially and after any design or process changes that may affect these parameters.
Document #: 38-06016 Rev. *D
Page 9 of 20
[+] Feedback
Share Link: 