RT9179A データシートの表示（PDF） - Richtek Technology
部品番号
コンポーネント説明
メーカー
RT9179A Datasheet PDF : 11 Pages
| |||
RT9179A
Note 1. Stresses listed as the above “Absolute Maximum Ratings” may cause permanent damage to the device. These are for
stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the
operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended
periods may remain possibility to affect device reliability.
Note 2. Devices are ESD sensitive. Handling precaution recommended
Note 3. The device is not guaranteed to function outside its operating conditions.
Note 4. The dropout voltage is defined as VIN -VOUT, which is measured when VOUT is VOUT(NORMAL) − 100mV.
Note 5. Quiescent, or ground current, is the difference between input and output currents. It is defined by IQ = IIN - IOUT under
no load condition (IOUT = 0mA). The total current drawn from the supply is the sum of the load current plus the ground
pin current.
Note 6. Standby current is the input current drawn by a regulator when the output voltage is disabled by a shutdown signal
(VEN ≤ 0.4V). It is measured with VIN = 5.5V.
Note 7. θJA is measured in the natural convection at TA = 25°C on the demo board, which has connected footprints as wide heat
sink. Please see the thermal considerations on application information.
www.richtek.com
4
DS9179A-07 March 2007
Share Link: 