S6B0756
65 COM / 96 SEG DRIVER & CONTROLLER FOR STN LCD
PIN DESCRIPTION
POWER SUPPLY
Table 3. Power Supply Pins
Name
VDD1
VDD2
VSS0
VSS1
VSS2
VOUT
V1
V2
V3
V4
I/O
Supply Power supply
Description
Supply Ground
NOTE: VSS0, VSS1 and VSS2 must be shorted to external wire.
LCD driver supply voltages
These voltages are determined by LCD pixel is impedance, and converted by
operational amplifiers for application.
Voltages should have the following relationship;
VOUT ≥ V1 ≥ V2 ≥ V3 ≥ V4 ≥ VSS
I/O When the internal power circuit is active, these voltages are generated as following table
according to the state of LCD bias.
LCD bias
V1
V2
V3
V4
1/N bias
(N-1) / N x
VOUT
NOTE: N = 4 to 9
(N-2) / N x VOUT (2/N) x VOUT
(1/N) x VOUT
LCD DRIVER SUPPLY
Table 4. LCD Driver Supply Pins
Name
VOUT
VCI1
VCI2
VCI3
I/O
Description
I/O
Voltage converter input/output pin
Connect this pin to VSS through capacitor.
Voltage converter input voltage pin and Power supply pins for Analog block
I
Voltages should have the following relationship: VDD ≤ VCI ≤ VOUT
7