SAK-XE167HM-72F80L データシートの表示（PDF） - Infineon Technologies

部品番号

コンポーネント説明

メーカー

SAK-XE167HM-72F80L

16-Bit Single-Chip Real Time Signal Controller

Infineon Technologies 

XE167FM, XE167GM, XE167HM, XE167KM

XE166 Family / Base Line

Summary of Features

– Two Synchronizable A/D Converters with a total of up to 24 channels, 10-bit

resolution, conversion time below 1 μs, optional data preprocessing (data

reduction, range check), broken wire detection

– Up to 8 serial interface channels to be used as UART, LIN, high-speed

synchronous channel (SPI), IIC bus interface (10-bit addressing, 400 kbit/s), IIS

interface

– On-chip MultiCAN interface (Rev. 2.0B active) with up to 128 message objects

(Full CAN/Basic CAN) on up to 6 CAN nodes and gateway functionality

– On-chip system timer and on-chip real time clock

• Up to 12 Mbytes external address space for code and data

– Programmable external bus characteristics for different address ranges

– Multiplexed or demultiplexed external address/data buses

– Selectable address bus width

– 16-bit or 8-bit data bus width

– Five programmable chip-select signals

– Hold- and hold-acknowledge bus arbitration support

• Single power supply from 3.0 V to 5.5 V

• Programmable watchdog timer and oscillator watchdog

• Up to 119 general purpose I/O lines

• On-chip bootstrap loaders

• Supported by a full range of development tools including C compilers, macro-

assembler packages, emulators, evaluation boards, HLL debuggers, simulators,

logic analyzer disassemblers, programming boards

• On-chip debug support via Device Access Port (DAP) or JTAG interface

• 144-pin Green LQFP package, 0.5 mm (19.7 mil) pitch

Data Sheet

8

V2.1, 2011-07

Share Link: