SERC816 データシートの表示（PDF） - STMicroelectronics

部品番号

コンポーネント説明

メーカー

SERC816

SERCOS INTERFACE CONTROLLER

STMicroelectronics 

SERCON816

1 GENERAL DESCRIPTION

The SERCOS interface controller SERCON816 is an integrated circuit for SERCOS interface communication

systems. The SERCOS interface is a digital interface for communication between systems which have to ex-

change information cyclically at short, fixed intervals (62,5 s to 65 ms). It is appropriate for the synchronous

operation of distributed control or test equipment (e.g. connection between drives and numeric control).

A SERCOS interface communication system consists of one master and several slaves. These units are

connected by a fiber optical ring. This ring starts and ends at the master. The slaves regenerate and repeat

their received data or send their own telegrams. By this method the telegrams sent by the master are re-

ceived by all slaves while the master receives data telegrams from the slaves. The optical fiber assures a

reliable high-speed data transmission with excellent noise immunity.

The SERCOS interface controller contains all the hardware-related functions of the SERCOS interface and

considerably reduces the hardware costs and the computing time requirements of the microprocessor. It is

the direct link between the electro-optical receiver and transmitter and the microprocessor that executes the

control algorithms. The SERCON816 can be used both for SERCOS interface masters and slaves.

The circuit contains the following functions (Fig. 1):

– Interface to the microprocessor with a data bus width of 8 or 16 bits and with control lines according to

Intel or Motorola standards.

– A serial interface for making a direct connection with the optical receiver and transmitter of the fiber optic ring

or with drivers to an electric ring or bus. Data and clock regeneration, the repeater for ring topologies and the

serial transmitter and receiver are integrated. The signals are monitored and test signals generated. The se-

rial interface operates up to 16 Mbaud without external circuitry.

– A dual port RAM (2048 * 16 bit) for control and communication data. The organization of the memory is flexible.

– Telegram processing for automatic transmission and monitoring of synchronous and data telegrams. Only

transmission data which is intended for the particular interface user is processed. The transmitted data is ei-

ther stored in the internal RAM (single or double buffer) or transferred via direct memory access (DMA). The

transmission of service channel information over several communication cycles is executed automatically.

In addition to the SERCOS interface the SERCON816 can also be used for other real-time communica-

tions tasks. As an alternative to the fiber optical ring also bus topologies with RS-485 signals are supported

(Fig. 4). The SERCON816 is therefore suitable for a wide range of applications.

Remark: The SERCON816 is based on the former SERCON410B SERCOS interface controller.

Figure 2. SERCON816 Pin Configuration

VSS 81

D11

D10

D9

D8 85

VDD

D7

D6

D5

D4 90

VSS

D3

D2

D1

D0 95

ADMUX

BUSMODE0

BUSMODE1

BUSWIDTH

BYTDIR 100

SERCON816

50 VSS

PCS1

PCSN0

MCSN1

MCSN0

45 BUSYN

INT0

INT1

VSS

DMAACKTN

40 DMAACKRN

DMAREQT

DMAREQR

VDD

DIV_CLK

35 CON_CLK

CYC_CLK

VSS

L_ERRN

31 TM1

3/23

Share Link: