SG140A-24IG/883B データシートの表示（PDF） - Microsemi Corporation
部品番号
コンポーネント説明
メーカー
SG140A-24IG/883B Datasheet PDF : 9 Pages
| |||
SG140A/SG140 SERIES
6.0V & 8.0V POSITIVE REGULATOR
ELECTRICAL CHARACTERISTICS (Note 1)
SG140 - 6
(Unless otherwise specified, these specifications apply over full operating ambient temperatures for SG140-06 with -55°C ≤ TA ≤ 150°C, and VIN = 11V,
IO = 500mA, CIN = 0. 33µF, COUT = 0.1µF and are applicable for the K, R, and IG - Power package - only. Low duty cycle pulse testing techniques are
used which maintains junction and case temperature equal to the ambient temperature.)
Parameter
Test Conditions
SG140 - 6
Units
Min. Typ. Max.
Output Voltage
Line Regulation (Note 1)
Load Regulation (Note 1)
Total Output Voltage
Tolerance
Quiescent Current
Quiescent Current Change
Dropout Voltage
Peak Output Current
Short Circuit Current
Ripple Rejection
Output Noise Voltage (rms)
Long Term Stability
Thermal Shutdown
IO = 5mA to 1.0A, TJ = 25°C
VIN = 9V to 21V
V = 8V to 25V, T = 25°C
IN
J
VIN = 9V to 13V, IO= 1.0 A
V = 8.3V to 21V, I = 1.0 A, T = 25°C
IN
O
J
IO = 5mA to 1.0A
I = 5mA to 1.5A, T = 25°C
O
J
IO = 250mA to 750mA, TJ = 25°C
VIN = 9V to 21V, IO = 5mA to 1.0A, P ≤ 15W
IO= 1.0 A
TJ= 25°C
With Line: VIN = 9V to 25V
VIN = 9V to 21V, IO = 1A, TJ = 25°C
With Load: IO = 5mA to 1.0A
∆VO
=
100mV,
I
O
=
1A,
T
J
=
25°C
TJ = 25°C
T = 25°C
J
∆VIN = 10V, f = 120Hz, TJ = 25°C
f = 10Hz to 100KHz (Note 2)
1000hrs. at TJ = 125°C
IO = 5mA
5.75 6.00 6.25 V
60 mV
60 mV
30 mV
60 mV
60 mV
60 mV
30 mV
5.7 6.0 6.3 V
7 mA
6 mA
0.8 mA
0.8 mA
0.5 mA
2 2.5 V
2.4
A
2.1
A
65
dB
40 µV/V
24
mV
175
°C
SG140 - 8
(Unless otherwise specified, these specifications apply over full operating ambient temperatures for SG140-08 with -55°C ≤ TA ≤ 150°C, and VIN = 14V,
IO = 500mA, CIN = 0. 33µF, COUT = 0.1µF and are applicable for the K, R, and IG - Power package - only. Low duty cycle pulse testing techniques are
used which maintains junction and case temperature equal to the ambient temperature.)
Parameter
Output Voltage
Line Regulation (Note 1)
Load Regulation (Note 1)
Total Output Voltage
Tolerance
Quiescent Current
Quiescent Current Change
Dropout Voltage
Peak Output Current
Short Circuit Current
Ripple Rejection
Output Noise Voltage (rms)
Long Term Stability
Thermal Shutdown
Test Conditions
IO = 5mA to 1.0A, TJ = 25°C
VIN = 11V to 23V
VIN = 10.5V to 25V, TJ = 25°C
VIN = 11V to 17V, IO = 1.0A
VIN = 10.5V to 23V, IO = 1.0A, TJ = 25°C
IO = 5mA to 1.0A
I = 5mA to 1.5A, T = 25°C
O
J
IO = 250mA to 750mA, TJ = 25°C
VIN = 11.5V to 23V, IO = 5mA to 1.0A, P ≤ 15W
I = 1.0A
O
TJ = 25°C
With Line: VIN = 11.5V to 25V
VIN = 11.5V to 23V, IO = 1A, TJ = 25°C
With Load: IO = 5mA to 1.0A
∆VO = 100mV, IO = 1A, TJ = 25°C
TJ = 25°C
TJ = 25°C
∆VIN = 10V, f = 120Hz, TJ = 25°C
f = 10Hz to 100KHz (Note 2)
1000hrs. at TJ = 125°C
I = 5mA
O
SG140 - 8
Units
Min. Typ. Max.
7.7 8.0 8.3 V
80 mV
80 mV
40 mV
80 mV
80 mV
80 mV
40 mV
7.6 8.0 8.4 V
7 mA
6 mA
0.8 mA
0.8 mA
0.5 mA
2 2.5 V
2.4
A
2.1
A
62
dB
40 µV/V
32
mV
175
°C
Note 1. All regulation tests are made at constant junction temperature with low duty cycle testing.
2. This test is guaranteed but is not tested in production.
2/90 Rev 1.4 6/97
Copyright 1997
LINFINITY Microelectronics Inc.
11861 Western Avenue ∞ Garden Grove, CA 92841
5
(714) 898-8121 ∞FAX: (714) 893-2570
Share Link: 