DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

SI4020 データシートの表示(PDF) - Silicon Laboratories

部品番号
コンポーネント説明
メーカー
SI4020
Silabs
Silicon Laboratories Silabs
SI4020 Datasheet PDF : 32 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Si4020
Note 1: Using a CR2032 battery (225 mAh capacity), the expected battery life is greater than 2 years using a 60-second wake-up period
for sending 100 byte packets in length at 19.2 kbps with +3 dBm output power in the 915 MHz band.
Note 2: Using anything but a 10 MHz crystal is allowed but not recommended because all crystal-referred timing and frequency
parameters will change accordingly.
Note 3: Adjustable in 8 steps.
Note 4: Optimal antenna admittance/impedance for the Si4020:
315 MHz
434 MHz
868 MHz
915 MHz
Yantenna [S]
9.4E-4 - j4.5E-3
8.4E-4 - j6.25E-3
1.15E-3 - j1.2E-2
1.2E-3 - j1.25E-2
Zantenna [Ohm]
43 + j214
21 + j157
7.9 + j83
7.6 + j79
Lantenna [nH]
112.00
59.00
15.30
13.90
Note 5: With selective resonant antennas (see: Application Notes available from http://www.silabs.com/integration).
Note 6: During this period, no commands are accepted by the chip. For detailed information see the Reset modes section.
Note 7: The crystal oscillator start-up time strongly depends on the capacitance seen by the oscillator. Using low capacitance and low ESR
crystal is recommended. When designing the PCB layout keep the trace connecting to the crystal short to minimize stray
capacitance.
9

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]