SMCG6037 データシートの表示（PDF） - Microsemi Corporation
部品番号
コンポーネント説明
メーカー
SMCG6037 Datasheet PDF : 4 Pages
| |||
8700 E. Thomas Road
Scotsdale, AZ 85252
Phone: (480) 941-6300
Fax: (480) 947-1503
FEATURES:
• BIDIRECTIONAL
• 1500 WATTS PEAK POWER
• VOLTAGE RANGE FROM 5.5V TO 185V
• LOW INDUCTANCE
• LOW PROFILE PACKAGE FOR SURFACE MOUNTING
DESCRIPTION:
These Transient Voltage Suppressor devices are a series of Bi-directional Silicon
Transient Suppressors used in AC applications where large voltage transients can
permanently damage voltage-sensitive components.
These devices are manufactured using two silicon PN, junctions in a back to back
configuration. They are characterized by their high surge capability, fast response
time, and low impedance, (Ron) for clamping surge.
The SMC series, rated for 1500 watts during a one millisecond pulse, can be used to
protect sensitive circuits against transients induced by lighting and inductive load
switching. The response time of TAZ clamping action is less than (5x10 -9) sec;
therefore, they can protect Integrated Circuits, MOS devices, Hybrids, and other
voltage-sensitive semiconductors and components. This series of devices has also
been proven very effective as EMP and ESD suppressors.
MAXIMUM RATINGS:
1500 watts of peak pulse power dissipation at 25°C
tclamping (0 volts to V(BR) min): less than 5 x 10-9 seconds
Operating and Storage Temperature: -65° to +150°C
Steady state power dissipation: 5.0 watts at TL = 25°C, at mounting plane.
Repetition rate (duty cycle): .01%
100
(Wave Form - See
Figure 2)
Non- Repetitive
10
1.0
0.1
100ns
1µs
10µs
100µs
1ms
tp Pulse Time
Figure 1
Peak Pulse Power vs Pulse Time
10ms
SMCG/J6036
thru
SMCG/J6072A
5.5 thru 185 Volts
1500 Watts
Transient Voltage
Suppressors
DO-214AB
DO-215AB
Mechanical
Characteristics
CASE: Molded, Surface
Mountable.
TERMINALS: Gull-wing or C-Bend
(modified J-bend) leads, tin lead
plated
POLARITY: No markings on
bi-directional devices.
PACKAGING: 16mm tape (See EIA
Std. RS-481.)
THERMAL RESISTANCE: 20°C/W
(typical) junction to lead (tab) at
mounting plane.
MSC1364.PDF 01/06/00
Share Link: 