DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

SNR032 データシートの表示(PDF) - Sonix Technology Co., Ltd

部品番号
コンポーネント説明
メーカー
SNR032
SONiX
Sonix Technology Co., Ltd SONiX
SNR032 Datasheet PDF : 10 Pages
1 2 3 4 5 6 7 8 9 10
SNR032
32M-bit Mask ROM
1. INTRODUCTION
The SNR032 is a signal power, 32M-bit, read only memory. It is organized as 4M bytes,
operates for single 3V power supply, support static standby mode. The SNR032
embedded two different interfaces, one is a standard 8-bit/16-bit interface bus which
compatible with SNL310, another one is a special 8-bit AD (address/data) bus which
compatible with SNC710.
SNR032 offers automatic power-down, with power-down controlled by the chip enable
“CEB”. When chip enable goes to high, SNR032 will entry power-down mode in order
to save the power consumption.
2. FEATURES
Power supply: 2.4V ~ 3.6V
Memory Size: 32M-bit
Totally static operation
Embedded a standard 8-bit/16-bit bus interface compatible with SNL310 or a 8-bit
AD (address/data) bus interface compatible with SNC710
Access time: 200ns @3V
3. PIN ASSIGNMENTS
Symbol IO
Standard Interface
AD Bus Interface
TYPE
I Bus mode select pin
“1”: AD bus mode
“1”->AD bus “0” for 8-bit/16-bit interface “0”: Standard mode
MODE I Bus mode select pin
-
“0”->byte mode “1” word mode interface
A[21..8] I Standard ROM A[21..8]
-
A[[7]
I Standard ROM A[7] / TESTM
TESTM
A[6]
I Standard ROM A[6] / BS4 ~ BS2
BS4
A[5]
I Standard ROM A[5] / BS4 ~ BS2
BS3
A[4]
I Standard ROM A[4] / BS4 ~ BS2
BS2
A[3..2] I Standard ROM A[3..2]
-
A[1]
I Standard ROM A[1]
ALECLK
A[0]
I Standard ROM A[0]
READY
D[8..15] I/O Data bus D[8..15]
-
(for word mode only)
D[0..7] I/O Data bus D[0..7]
AD-Bus D[0..7]
CEB
I Chip enable pin
Chip enable pin
OEB
I Output enable pin
-
VDD
P Positive Power supply (3.3volt)
Positive Power supply (3.3volt)
GND
P Negative Power supply (3.3volt)
Negative Power supply (3.3volt)
Ver. 1.2
3
October 21, 2005

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]