BA3835F データシートの表示（PDF） - ROHM Semiconductor

部品番号

コンポーネント説明

メーカー

BA3835F

Band-pass filter for spectrum analyzer

ROHM Semiconductor 

Audio ICs

(6) Output offset voltage

The relationship between the output offset voltage and

the output selection cycle (cycle time) for this IC is shown

in Fig.5. The maximum output offset voltage of 150mV

that is given in the electrical characteristics table is under

the condition that Ts = 200ms. When Ts is greater than

50ms, the graph of the output offset voltage is a straight

line at 150mV. When Ts is below 50ms, due to transient

characteristics of the peak hold circuit, the graph is a line

sloping downwards to the right. In other words, the short-

er the cycle, the larger the output offset voltage.

Furthermore, the output offset voltage may shift due to

soldering or other temperature stresses from the sur-

roundings. Therefore, when setting the spectral analyzer

light level, take into consideration the points given above

and make sure that it does not light by mistake during

quiescent periods. Use the chart below as a guide for

this, and, if necessary, leave even a larger margin.

FElectrical characteristics curves

BA3835S / BA3835F

609

Share Link: