SPX4040B3S-2.5 データシートの表示（PDF） - Signal Processing Technologies
部品番号
コンポーネント説明
メーカー
SPX4040B3S-2.5 Datasheet PDF : 8 Pages
| |||
SPX4040 Applications Hints
This device is designed for stable operation and has no need
of an external capacitor between pin 4 and 8. The reference
remains stable if a bypass capacitor is used.
SOT-23
The SPX4040 in the SOT-23 package has a parasitic
Schottky diode between pin 3 and pin 1. Pin 1 of SOT-23
must float or be connected to pin 3.
Conventional Shunt Regulator
In a conventional shunt regulator application (see Figure 1),
an external series resister (RS) is connected between the
supply voltage and the SPX4040. RS determines the current
that flows through the load (IL) and the reference(IQ). Since
load current and supply voltage may vary, RS should be small
enough to supply at least the minimum acceptable IQ to the
reference even when the supply voltage is at its minimum and
the load current is at its maximum value. When the supply
voltage is at its maximum and IL is at its minimum, RS should
be large enough so that the current flowing through the
SPX4040 is less than 15mA
RS is determined by the supply voltage (VS), the load and
operating current (IL and IQ), reference’s reverse breakdown
voltage (VR).
RS = (VS - VR)/(IL+IQ)
SPX4040
Figure 1. SPX4040 Fixed
Shunt Regulator Application
VS
RS
VR
SPX4040
IO + IL
IL
VO
IQ
Rev. 10/25/00
Share Link: 