STK621-033N-E データシートの表示（PDF） - SANYO -> Panasonic
部品番号
コンポーネント説明
メーカー
STK621-033N-E Datasheet PDF : 8 Pages
| |||
STK621-033N-E
Notes
1. Input ON voltage indicates a value to turn on output stage IGBT.
Input OFF voltage indicates a value to turn off output stage IGBT.
At the time of output ON, set the input signal voltage 0V to VIH (MAX).
At the time of output OFF, set the input signal voltage VIL (MIN) to 5V.
2. When the internal protection circuit operates, there is a Fault signal ON (When the Fault terminal is low level, Fault
signal is ON state : output form is open DRAIN) but the Fault signal doesn't latch.
After protection operation ends, it returns automatically within about 18ms to 80ms and resumes operation beginning
condition. So, after Fault signal detection, set OFF (HIGH) to all input signals at once.
However, the operation of pre-drive power supply low voltage protection (UVLO: it has a hysteresis about 0.3V) is
as follows.
Upper side → There is no Fault signal output, but it does a corresponding gate signal OFF.
Incidentally, it returns to the regular operation when recovering to the normal voltage, but the latch
continues among input signal ON (LOW).
Lower side → It outputs Fault signal with gate signal OFF.
However, it is different from the protection operation of upper side, it is automatically resets about
18ms to 80ms later and resumes operation beginning condition when recovering to normal voltage.
(The protection operation doesn't latch by the input signal.)
3. When assembling the hybrid IC on the heat sink with M3 type screw, tightening torque range is 0.8N•m to 1.0N•m.
Flatness of the heat-sink should be lower than 0.15mm.
4. The pre-drive low voltage protection is the feature to protect a device when the pre-driver supply voltage declines
with the operating malfunction. As for the pre-driver supply voltage decline in case of operation beginning, and so on,
we request confirmation in the set.
Package Dimensions
unit:mm (typ)
56.0
R1.7
1
23
2.0
2.0
0.6
22 2.0=44.0
46.2
3.2
6.7
50.0
62.0
No.A2127-3/8
Share Link: 