STK681-352-E データシートの表示（PDF） - SANYO -> Panasonic

部品番号

コンポーネント説明

メーカー

STK681-352-E

Thick-Film Hybrid IC Forward/Reverse Motor Driver

SANYO -> Panasonic 

STK681-352-E

I/O Functions of Each Pin

Pin Name

IN1

IN2

ENABLE

FAULT

OUT1

OUT2

Vref

GND

S.GND

VCC

Pin No.

16

17

18

13

8, 10

4, 6

19

1, 2, 3

14

7, 9

Function

Input pin for turning F2 and F4 ON and OFF

At low level F2: ON and F4: OFF; at high level, F2: OFF and F4: ON

Input pin for turning F1 and F3 ON and OFF

At low level F1: ON and F3: OFF; at high level, F1: OFF and F3: ON

Pin for turning F3 and F4 ON; At high level F3 and F4: ON

ENABLE must be set Low when VDD is rising and falling.

ENABLE must be set High to drive the motor.

Monitor pin used when either of the output short-circuit detector, overcurrent detector, or overheat detector is

activated. When the detector is activated, this pin is set low and all of F1, F2, F3 and F4 in the final stage are

latched off.

This pin connects to the motor and outputs source/sync current depending on conditions at IN1 and IN2.

This pin connects to the motor and outputs source/sync current depending on conditions at IN1 and IN2.

This pin limits the peak current when motor startup.

The current setting voltage, Vref, is set to the value of 4.9 times the voltage drop of the external current detection

resistor.

The internal overcurrent detection level is 0.48V, so setting Vref < 2.0V is recommended.

Power system ground

Control system ground

Motor system supply voltage

No.A1929-8/14

Share Link: