STM-3116 データシートの表示（PDF） - Unspecified
部品番号
コンポーネント説明
メーカー
STM-3116 Datasheet PDF : 6 Pages
| |||
Package Dimensions (“16” Package)
Dimensions in inches (mm)
STM-3116 SiGe Active Transmit Mixer
STM
3116
LOT ID
Part #
Suggested PCB Pad Layout
0.049
(1.25)
0.012 (0.30)
0.024
(0.63)
0.118
(3.0)
NOTES:
1. PACKAGE BODY SIZES EXCLUDE MOLD FLASH
PROTRUSIONS OR GATE BURRS.
2. TOLERANCE ±.004" (0.1mm) UNLESS OTHERW ISE
SPECIFIED.
3. COPLANARITY: .004" (0.1mm)
4. CONTROLLING DIMENSION IS MILLIMETER,
CONVERTED INCH DIMENSIONS ARE NOT
NECESSARILY EXACT.
5. FOLLOWED FROM JEDEC MO-153.
0.014 (0.35)
0.118
(3.0)
0.028
(0.7)
0°
φ0.010 (0.25) via
8°
0.035
(0.9)
0.272 (6.9)
all units are in inches (mm)
- Indicates metalization - vias connect pad to underlying ground plane
Pin Out Description
Pin # Function
Description
1
VEE Ground
2
VCC Positive supply (+5V)
3
VEE Ground
4
RFN RF output, negative terminal
5
RFP RF output, positive terminal
6
VEE Ground
7
VCC Positive supply (+5V)
8
IFN IF input, negative terminal
9
IFP IF input, positive terminal
10
VCC Positive supply (+5V)
11
VEE Ground
12
LOP LO input, positive terminal
13
LON LO input, negative terminal
14
VEE Ground
15
VCC Positive supply (+5V)
16
VEE Ground
Additional Comments
Nominal DC voltage is 2.3V. (Internally biased) Output should be AC-coupled.
Nominal DC voltage is 2.3V. (Internally biased) Output should be AC-coupled.
Nominal DC voltage is 2.3V. (Internally biased) Input should be AC-coupled.
Nominal DC voltage is 2.3V. (Internally biased) Input should be AC-coupled.
Nominal DC voltage is 2.3V. (Internally biased) Input should be AC-coupled.
Nominal DC voltage is 2.3V. (Internally biased) Input should be AC-coupled.
Absolute Maximum Ratings
Parameters
Value
Unit
Supply Voltage (Vcc)
LO Input (LOP+LON)
+6.0
+10
VDC
dBm
IF Input (IFP, IFN)
+15
dBm
Operating Temperature
-40 to +85
ºC
Storage Temperature
-65 to +150
ºC
Operation of this device beyond any one of these limits may
cause permanent damage. For reliable continuous operation the
device voltage and current must not exceed the maximum oper-
ating values specified in the table on page one.
Part Number Ordering Information
Devices/Reel
Part Number Reel Size
Min.
Max.
STM-3116
7”
500
1000
Moisture sensitivity level 1 - no special han-
dling required
Caution: ESD Sensitive
Appropriate precaution in handling, packaging
and testing devices must be observed.
522 Almanor Ave., Sunnyvale, CA 94085
Phone: (800) SMI-MMIC
4
http://www.sirenza.com
EDS102201 Rev B
Share Link: 