TA22 データシートの表示（PDF） - Vishay Semiconductors
部品番号
コンポーネント説明
メーカー
TA22 Datasheet PDF : 3 Pages
| |||
TA 22
Vishay Sfernice
Single Value Chip Resistor
Actual Size
Thin film resistors are often an excellent solution for analog
design problems where space is limited and high packing
density is required. Due to their Tantalum Nitride resistive
layer these resistors are stable 0.07 % (2000 h, rated power
at + 70 °C) and moisture resistant.
SCHEMATIC AND PATTERN
FEATURES
• Small size 20 mil square
• Resistance range 10 Ω to 1 MΩ
• Resistor material: self-passivating
Tantalum Nitride
• Silicon substrate for good power dissipation
• Low cost
• Wirebondable
TYPICAL PERFORMANCE
TCR
TOL.
ABS
100 ppm/°C
0.5 %
R
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
MATERIAL
TANTALUM NITRIDE
Resistance range
10 Ω to 1 MΩ
Absolute TCR
± 100 ppm/°C (± 50 ppm/°C on request)
Absolute tolerance
± 0.5 %, ± 1 %, ± 2 %
Power dissipation
100 mW at 25 °C, 50 mW at + 70 °C, 25 mW at + 125 °C
Stability
± 0.07 % typical, ± 0.1 maximum
Voltage coefficient
< 0.1 ppm/V
Working voltage
Operating temperature range
50 VDC
- 55 °C to + 155 °C
Storage temperature range
- 55 °C to + 155 °C
Noise
< - 35 dB typical
Thermal EMF
< 0.01 µV/°C
Shelf life stability
100 ppm
CONDITIONS
- 55 °C to + 155 °C
2000 h at + 70 °C at Pn
MIL-STD-202 Method 308
1 year at + 25 °C
* Please see document “Vishay Green and Halogen-Free Definitions (5-2008)” http://www.vishay.com/doc?99902
www.vishay.com
40
For technical questions, contact: sfer@vishay.com
Document Number: 60062
Revision: 06-Oct-08
Share Link: 