TC7106A(2002) データシートの表示（PDF） - Microchip Technology

部品番号

コンポーネント説明

メーカー

TC7106A
(Rev.:2002)

3-1/2 Digit Analog-to-Digital Converters

Microchip Technology 

TC7106/A/TC7107/A

TABLE 2-1: PIN FUNCTION TABLE (CONTINUED)

Pin Number

Pin No.

(40-Pin PDIP) (40-Pin PDIP)

Normal

(Reversed

36

(5)

37

(4)

38

(3)

39

(2)

40

(1)

Symbol

VREF+

TEST

OSC3

OSC2

OSC1

Description

The analog input required to generate a full scale output (1999 counts). Place 100mV

between Pins 35 and 36 for 199.9mV full scale. Place 1V between Pins 35 and 36 for

2V full scale. See paragraph on Reference Voltage.

Lamp test. When pulled HIGH (to V+) all segments will be turned on and the display

should read -1888. It may also be used as a negative supply for externally generated

decimal points. See paragraph under TEST for additional information.

See Pin 40.

See Pin 40.

Pins 40, 39, 38 make up the oscillator section. For a 48kHz clock (3 readings per

section), connect Pin 40 to the junction of a 100kΩ resistor and a 100pF capacitor.

The 100kΩ resistor is tied to Pin 39 and the 100pF capacitor is tied to Pin 38.

© 2002 Microchip Technology Inc.

DS21455B-page 7

Share Link: