TDA7565(2003) データシートの表示（PDF） - STMicroelectronics
部品番号
コンポーネント説明
メーカー
TDA7565 Datasheet PDF : 10 Pages
| |||
TDA7565
SOFTWARE SPECIFICATIONS
All the functions of the TDA7565 are activated by I2C interface.
The bit 0 of the "ADDRESS BYTE" defines if the next bytes are write instruction (from µP to TDA7565) or
read instruction (from TDA7565 to µP).
D7
D6
D5
D4
D3
D2
D1
D0(R/W)
Address bit
Address bit
Address bit
Address bit
Address bit
Address bit
Address bit
Read/Write bit
0 = Write instruction
1 = read instruction
If R/W = 0, the µP sends 2 "Instruction Bytes": IB1 and IB2.
IB1
D7
Sel Freq Switch 1
D6
Sel Freq Switch 2
D5
Offset Detection start (D5 = 1)
Offset Detection stop (D5 = 0) (off)
D4
Front Channel
Gain = 26dB (D4 = 0)
Gain = 12dB (D4 = 1)
D3
Rear Channel
Gain = 26dB (D3 = 0)
Gain = 12dB (D3 = 1)
D2
Mute front channels (D2 = 0)
Unmute front channels (D2 = 1)
D1
Mute rear channels (D1 = 0)
Unmute rear channels (D1 = 1)
D0
CD 1% (D0 = 0)
CD 10% (D0 = 1)
IB2
D7
D6
D5
D4
D3
D2
D1
D0
Voltage Converter Enabled (D7 = 1)
Voltage Converter Disabled (D7 = 0)
Regulated voltage selection 1
Test Speed
Stand-by on - Amplifier not working - (D4 = 0)
Stand-by off - Amplifier working - (D4 = 1)
Regulated voltage selection 0)
To be forced to “Level 1”
Right Channel
Power amplifier working in standard mode (D1 = 0)
Power amplifier working in HiEff mode(D1 = 1)
Left Channel
Power amplifier working in standard mode (D0 = 0)
Power amplifier working in HiEff mode(D0 = 1)
6/10
Share Link: 