DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

TDA8043 データシートの表示(PDF) - Philips Electronics

部品番号
コンポーネント説明
メーカー
TDA8043
Philips
Philips Electronics Philips
TDA8043 Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Philips Semiconductors
Satellite Demodulator and Decoder (SDD)
Product specification
TDA8043
FEATURES
One-chip Digital Video Broadcasting (DVB) compliant
demodulator and concatenated Viterbi/Reed-Solomon
decoder with de-interleaver and de-randomizer
3.3 V supply voltage (up to 5 V allowed)
Internal clock divider
On-chip crystal oscillator
QPSK/BPSK demodulator:
– Interpolator to handle variable symbol rates without
an external anti-aliasing filter
– On-chip Automatic Gain Control (AGC) of the analog
input I and Q baseband signals or tuner AGC control
– Two on-chip matched Analog-to-Digital Converters
(ADCs; 7 bits)
– Square-Root Raised-Cosine Nyquist filter with
programmable roll-off factor
– High maximum symbol frequency: 32 Msymbols/s
– Can be used at low channel Es/No
(Symbol energy-to-noise ratio)
– Internal carrier recovery, clock recovery and AGC
loops with programmable loop filters
– Two carrier recovery loops enabling phase tracking of
the incoming symbols
– Different modulation schemes: Quadrature Phase
Shift Keying (QPSK) and Binary-Phase Shift Keying
(BPSK)
– Signal-to-noise ratio (S/N) estimation
– External indication of demodulator lock.
Viterbi decoder:
– Rate 12 convolutional code based
– Constraint length K = 7 with G1 = 171oct and
G2 = 133oct
– Supported puncturing code rates: 12, 23, 34, 45, 56,
67, 78 and 89
– 4 bits ‘soft decision’ inputs for both I and Q
– Truncation length: 144
– Automatic synchronization to correct puncturing rate
and spectral inversion
– Channel Bit Error Rate (BER) estimation from
102 to 108
– External indication of Viterbi synchronization lock
– Differential decoding supported.
Reed-Solomon (RS) decoder:
– (204, 188 and T = 8) Reed Solomon code
– Automatic (I2C-bus configurable) synchronization of
bytes, transport packets and frames
– Internal convolutional de-interleaving (I = 12; using
internal memory)
– De-randomizer based on Pseudo Random Binary
Sequence (PRBS)
– External indication of RS decoder sync lock
– External indication of uncorrectable errors (transport
error indicator is set)
– Indication of the number of lost blocks
– Indication of the number of corrected blocks/bytes.
I2C-bus interface:
– I2C-bus interface initializes and monitors the
demodulator and Forward Error Correction (FEC)
decoder with standby mode; when no I2C-bus is
used, default mode is defined
– 4-bit I/O expander for flexible access to and from the
I2C-bus
– I2C-bus configurable interrupt pin
– Standby mode for reduced power consumption.
Package: QFP100
Boundary scan test.
APPLICATIONS
Demodulation and FEC for digital satellite TV.
1998 Feb 13
2

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]