TEA6810V データシートの表示（PDF） - Philips Electronics
部品番号
コンポーネント説明
メーカー
TEA6810V Datasheet PDF : 22 Pages
| |||
TPS72501
TPS72515, TPS72516
TPS72518, TPS72525
SLVS341D – MAY 2002 – REVISED MARCH 2004
www.ti.com
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
DESCRIPTION (CONTINUED)
Although an output capacitor is not required for stability, transient response and output noise are improved with a
10-µF output capacitor.
Unlike some regulators that have a minimum current requirement, the TPS725 family is stable with no output
load current. The low noise capability of this family, coupled with its high current operation and ease of power
dissipation, make it ideal for telecom boards, modem banks, and other noise-sensitive applications.
TJ
-40°C to
125°C
VOLTAGE (1)
Adjustable (1.2 V to 5 V)
1.5 V
1.6 V
1.8 V
2.5 V
ORDERING INFORMATION
SOT223-5 (2)
SYMBOL
DDPAK (3)
TPS72501DCQ
PS72501
TPS72501KTT
TPS72515DCQ
PS72515
TPS72515KTT
TPS72516DCQ
PS72516
TPS72516KTT
TPS72518DCQ
PS72518
TPS72518KTT
TPS72525DCQ
PS72525
TPS72525KTT
D (4)
TPS72501D
—
—
—
—
SYMBOL
TPS72501
TPS72515
TPS72516
TPS72518
TPS72525
(1) Other voltage options are available upon request from the manufacturer.
(2) To order a taped and reeled part, add the suffix R to the part number (e.g., TPS72501DCQR).
(3) To order a 50-piece reel, add the suffix T (e.g., TPS72501KTTT); to order a 500-piece reel, add the suffix R (e.g., TPS72501KTTR).
(4) To order a taped and reeled part, add the suffix R or T (2500 or 500) to the part number (e.g. TPS72501DR)
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range unless otherwise noted(1)
Input voltage, VI (2)
Voltage range at EN, FB
Voltage on OUT, RESET
ESD rating, HBM
Continuous total power dissipation
Operating junction temperature range, TJ
Maximum junction temperature range, TJ
Storage temperature, Tstg
UNIT
-0.3 to 7
V
-0.3 to VI + 0.3
V
6
V
2
kV
See Dissipation Ratings Table
-50 to 150
°C
150
°C
-65 to 150
°C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values are with respect to network ground terminal.
RECOMMENDED OPERATING CONDITIONS
Input voltage, VI (1)
Continuous output current, IO
Operating junction temperature, TJ
(1) Minimum VI = VO (nom) + VDO.
MIN NOM MAX UNIT
1.8
6V
0
1A
-40
125 °C
2
Share Link: 