TEA6880 データシートの表示（PDF） - Philips Electronics

部品番号

コンポーネント説明

メーカー

TEA6880

Up-level Car radio Analog Signal Processor CASP

Philips Electronics 

Philips Semiconductors

Up-level Car radio Analog Signal

Processor (CASP)

Product specification

TEA6880H

1 FEATURES

1.1 General

• I2C-bus compatible

• Digital alignment/adjustment via I2C-bus:

– FM noise blanker sensitivity

– FM stereo noise canceller

– FM High Cut Control (HCC)

– FM stereo separation.

• FM audio processing hold for RDS updating; holds the

detectors for the FM weak signal processing in their

present state

• FM bandwidth limiting; limits the bandwidth of the FM

audio signal with external capacitors

• AM stereo input; AM stereo audio can be fed in at the

pins for the de-emphasis capacitors; this will provide

8 dB of gain to the AM audio.

1.2 Stereo decoder and noise blanking

• FM stereo decoder

• Accepts FM multiplex signal and AM audio at input

• Pilot detector and pilot canceller

• De-emphasis selectable between 75 and 50 µs

• AM noise blanker: impulse noise detector and an audio

hold.

1.3 Weak signal processing

• FM weak signal processing: six signal condition

detectors, soft mute, stereo noise canceller (blend), and

High Cut Control (roll-off).

1.4 Audio pre-amplifier

• Source selector for 6 sources: 2 stereo inputs external

(A and B), 1 symmetrical stereo input (C), 1 symmetrical

mono input (D), 1 internal stereo input (AM or FM), and

1 chime/diagnostic mono input

• Volume 1 control from +20 to −56 dB in 1 dB steps;

programmable 20 dB loudness control included

• Volume 2 control from 0 to −56 dB in 1 dB steps, −56,

−58.5, −62, −68 dB and mute

• Programmable loudness control with bass boost as well

as bass and treble boost

• Treble control from −14 to +14 dB in 2 dB steps

• Bass control from −18 to +18 dB in 2 dB steps with

selectable characteristic

• Analog Step Interpolation (ASI) minimizes pops by

smoothing out the transitions in the audio signal when a

switch is made

• Audio Blend Control (ABC) minimizes pops by

automatically incrementing the volume and loudness

controls through each step between their present

settings and the new settings

• Rear Seat Audio (RSA) can select different sources for

the front and rear speakers

• Chime input: can be sent to any audio output, at any

volume level

• Chime adder circuit: chime input can also be summed

with left front and/or right front audio, or be turned off.

2 GENERAL DESCRIPTION

The TEA6880H is a monolithic bipolar integrated circuit

providing the stereo decoder function and ignition noise

blanking facility combined with source selector and

tone/volume control for AM/FM car radio applications. The

device operates with a power supply voltage range of

7.8 to 9.2 V and a typical current consumption of 40 mA.

3 ORDERING INFORMATION

TYPE

NUMBER

TEA6880H

NAME

QFP64

PACKAGE

DESCRIPTION

plastic quad flat package; 64 leads (lead length 1.95 mm);

body 14 × 20 × 2.8 mm

VERSION

SOT319-2

2000 May 08

3

Share Link: