HDD100 SERIES
DC-DC CONVERTER
100W
SPECIFICATION
All Specifications Typical At Nominal Line, Full Load, 25℃ Unless Otherwise Noticed
GENERAL SPECIFICATION
* Switching frequency: ......................... 80KHz (typ.)
* Isolation voltage: .............................. 1,500VDC
* Isolation resistance: .......................... 1G Ω(min.)
* Operating ambient temperature: ......... -25 to +71℃
* Storage temperature: ........................ -25 to +100℃
* Max. Case temperature: ..................... 100℃
* M.T.B.F.: .......................................... 100,000Hrs at @ GF40, according to MIL-HDBK-217F
* Cooling: ........................................... Ffree air convection
* Transient recovery time: .................... 500µS, 25% load step change
* Temperature coefficient: .................... ±0.02% / ℃
* Dimension: ...................................... 88.9 x 140 x 43mm
INPUT SPECIFICATIONS
* Input voltage range / frequency: ........ 18 ~ 36VDC for 24V
36 ~ 72VDC for 48V
* Input filter: ....................................... Pi type
OUTPUT SPECIFICATIONS
* Output voltage accuracy: ................... ±1% at Vo_nom
* Line regulation: ................................ ±1% at Vo_nom
* Load regulation: ............................... ±2%) at Vo_nom for single output models
* Ripple & noise: ................................. ±1%mV (max.)
* Efficiency: ........................................ Up to 86%, see model list
* Voltage trim range: ........................... ±10% at Vo_nom
* Derating: ......................................... See table 1
* Case material: .................................. Metal
CONTROL AND PROTECTION
* Remote on/off: ................................. ON : Open or +5.5VDC(Min.)
OFF : +1.8VDC(Max.)
* Output short circuit: .......................... Continuous
CHINFA ELECTRONICS IND., CO. LTD.
ISO 9001 Certified
www.chinfa.com
sales@chinfa.com