TJA1041A データシートの表示（PDF） - Philips Electronics

部品番号

コンポーネント説明

メーカー

TJA1041A

High speed CAN transceiver

Philips Electronics 

Philips Semiconductors

High speed CAN transceiver

Product specification

TJA1041A

Table 1 Operating mode selection

CONTROL PINS

STB

EN

X

X

L

L

L

H

H

L

H

H

INTERNAL FLAGS

UVNOM UVBAT pwon, wake-up

OPERATING MODE

set

X

X(1)

sleep mode; note 2

cleared

set

one or both set standby mode

both cleared no change from sleep mode

standby mode from any other mode

cleared cleared one or both set standby mode

both cleared no change from sleep mode

standby mode from any other mode

cleared cleared one or both set standby mode

both cleared no change from sleep mode

go-to-sleep command mode from any

other mode; note 3

cleared cleared

X

pwon/listen-only mode

cleared cleared

X

normal mode; note 4

PIN INH

floating

H

floating

H

H

floating

H

H

floating

H(3)

H

H

Notes

1. Setting the pwon flag or the wake-up flag will clear the UVNOM flag.

2. The transceiver directly enters sleep mode and pin INH is set floating when the UVNOM flag is set (so after the

undervoltage detection time on either VCC or VI/O has elapsed before that voltage level has recovered).

3. When go-to-sleep command mode is selected for longer than the minimum hold time of the go-to-sleep command,

the transceiver will enter sleep mode and pin INH is set floating.

4. On entering normal mode the pwon flag and the wake-up flag will be cleared.

2004 Feb 20

6

Share Link: