TMP86C829BFG データシートの表示（PDF） - Toshiba

部品番号

コンポーネント説明

メーカー

TMP86C829BFG

8 Bit Microcontroller TLCS-870/C Series

Toshiba 

TMP86C820FG

The Functional Differences on Products basis: TMP86C829B/CH29B/CM29B/PM29A/

PM29B/FM29/CM29L.

Products name

ROM

RAM

DBR

I/O port

Large current output

(Nch) port

Interrupt sources

Timer/Counter

UART/SIO

Key-on wakeup

AD converter

LCD driver

Circuitry of TEST pin

Feedback resistor in

High- frequency circuit

(Note4)

Feedback resistor in

Low- frequency circuit

(Note4)

Emulation Chip

(Note2)

Package

Operating voltage

(Note 5)

TMP86C829B

8K bytes

(MASK)

512 bytes

TMP86CH29B

16K bytes

(MASK)

TMP86CM29B

32K bytes

(MASK)

TMP86PM29A

TMP86PM29B

32K bytes

(OTP)

1.5K bytes

128 bytes

(Flash memory control/status registers <EEPCR, EEPSR> are non-available.)

39 pins

4 pins (Sink-open-drain output)

20 mA (Typ)

External: 5 Internal: 14

18bit Timer/Counter: 1ch

8bit Timer/Counter: 4ch

1ch (Note1)

4ch

10bit x 8ch (Note3)

32SEG x 4COM

TMP86FM29

32K bytes

(FLASH)

TMP86CM29L

32K bytes

(MASK)

128 bytes

(Flash memory control/status registers

<EEPCR, EEPSR> are available.)

4 pins (Sink-open-drain output)

6 mA (Typ)

VDD

R

RIN

No Protection

Diode (VDD side)

R

No Pull down

Resistor

VDD

R

RIN

Rf = 1.2 M Ω(Typ)

Rf = 3 M Ω(Typ)

Rf = 6 M Ω(Typ)

TMP86C929AXB

P-QFP64-1414-0.80C

P-LQFP64-1010-0.50E

1.8V to 5.5V at 4.2MHz/32.768kHz

2.7V to 5.5V at 8.0MHz/32.768kHz

4.5V to 5.5V at 16MHz/32.768kHz

Rf = 20 M Ω(Typ)

P-LQFP64-1010-

0.50D

1.8V to 3.6V at 8.0MHz/32.768kHz

2.7V to 3.6V at 16MHz/32.768kHz

(Note 6)

Note 1: UART and SIO can not use function synchronously because each function pins are shared.

Note 2: An emulation chip (TMP86C929AXB) can’t emulate the Flash memory functions, CPU wait and serial PROM mode.

Therefore, if the software which includes Flash memory function or CPU wait is executed in TMP86C929AXB, the opera-

tion might be different from TMP86FM29/CM29L.

Note 3: The operating temperature (Topr) of AD characteristics of all products (TMP86C829B/CH29B/CM29B/PM29A/PM29B/

FM29/CM29L) is -10℃ to 85℃ when the supply voltage VDD is less than 2.0V. For details, please refer to "AD Conversion

Characteristics" in data sheet of each product.

Note 4: The typical value of high and low frequency feedback resistor in TMP86FM29/CM29L are different from that of the other

products. For details, please refer to "Input/Output Circuitry" in data sheet of each product.

Note 5: The characteristic of power supply current differs in each product. For details, please refer to "Electirical Characteristics"

in data sheet of each product.

Note 6: The recommended operating condition of serial PROM mode in TMP86FM29 is different from MCU mode. Fore details,

please refer to "Electirical Characteristics" in data sheet of each product.

Share Link: