UT0.25UCRH データシートの表示（PDF） - Aeroflex UTMC
部品番号
コンポーネント説明
メーカー
UT0.25UCRH Datasheet PDF : 12 Pages
| |||
IDDQ
Quiescent Supply Current6
Group A, subgroups 1,3
Group A, subgroup 2
Group A, subgroup 1
RHA Designator: M, D, P, L, R
VDD = 3.6V
200K gates
400K gates
600K gates
800K gates
1000K gates
1500K gates
2000K gates
2500K gates
3000K gates
VDD = 3.6V
200K gates
400K gates
600K gates
800K gates
1000K gates
1500K gates
2000K gates
2500K gates
3000K gates
VDD = 3.6V
200K gates
400K gates
600K gates
800K gates
1000K gates
1500K gates
2000K gates
2500K gates
3000K gates
µA
50
100
150
200
250
375
500
625
750
mA
1
2
3
4
5
7.5
10
12.5
15
mA
4
6
8
10
12
18
24
30
36
Notes:
* Contact Aeroflex UTMC prior to usage.
1. Functional tests are conducted in accordance with MIL-STD-883 with the following input test conditions: VIH = VIH (min) + 20%, - 0%;
VIL = VIL(max) + 0%, - 50%, as specified herein, for TTL, CMOS, or Schmitt compatible inputs. Devices may be tested using any input voltage
within the above specified range, but are guaranteed to VIH (min) and VIL(max).
2. Supplied as a design limit but not guaranteed or tested.
3. Per MIL-PRF-38535, for current density < 5.0E5 amps/cm 2, the maximum product of load capacitance (per output buffer) times frequency should not
exceed 3,765pF*MHz.
4. Not more than one output may be shorted at a time for maximum duration of one second.
5. Capacitance measured for initial qualification and when design changes may affect the value. Capacitance is measured between the designated terminal and V SS
at frequency of 1MHz @0V and a signal amplitude of <50mV RMS.
6. All inputs with internal pull-ups should be left floating. All other inputs should be tied high or low.
11
Share Link: 