TSC1021(2010) データシートの表示（PDF） - STMicroelectronics

部品番号

コンポーネント説明

メーカー

TSC1021
(Rev.:2010)

High-side current sense amplifier

STMicroelectronics 

TSC1021

5

Parameter definitions

Parameter definitions

5.1

Common mode rejection ratio (CMR)

The common-mode rejection ratio (CMR) measures the ability of the current-sensing

amplifier to reject any DC voltage applied on both inputs Vp and Vm. The CMR is referred

back to the input so that its effect can be compared with the applied differential signal. The

CMR is defined by the formula:

CMR

=

–20 ⋅

log --------Δ----V----o---u---t--------

ΔVicm ⋅ Av

5.2

Supply voltage rejection ratio (SVR)

The supply-voltage rejection ratio (SVR) measures the ability of the current-sensing

amplifier to reject any variation of the supply voltage VCC. The SVR is referred back to the

input so that its effect can be compared with the applied differential signal. The SVR is

defined by the formula:

SVR = –20 ⋅ log Δ-----V--Δ--c--Vc----o⋅---u---tA----v--

5.3

Gain (Av) and input offset voltage (Vos)

The input offset voltage is defined as the intersection between the linear regression of the

Vout vs. the Vsense curve with the X-axis. If Vout1 is the output voltage with

Vsense = Vsense1 = 50 mV and Vout2 is the output voltage with Vsense = Vsense2 = 5 mV, then

Vos can be calculated with the following formula.

Vos

=

Vsense1

–

⎛

⎝

-V----s--e---n---s---e---1----–-----V----s---e--n---s---e---2-

Vout1 – Vout2

⋅

Vou

⎞

t1⎠

5.4

Output voltage drift versus temperature

The output voltage drift versus temperature is defined as the maximum variation of Vout with

respect to its value at 25°C, over the temperature range. It is calculated as follows:

Δ----V-Δ----oT---u----t = max V-----o---u----t--(---T--T--a--a-m---m---b--b-)----––----V2----5-o--°-u---C-t--(--2----5----°---C-----)

with Tmin < Tamb < Tmax.

Doc ID 17857 Rev 1

7/12

Share Link: