SN74LS379DW データシートの表示（PDF） - Motorola => Freescale
部品番号
コンポーネント説明
メーカー
SN74LS379DW
Motorola => Freescale
SN74LS379DW Datasheet PDF : 7 Pages
| |||
OCTAL D FLIP-FLOP WITH ENABLE;
HEX D FLIP-FLOP WITH ENABLE;
4-BIT D FLIP-FLOP WITH ENABLE
The SN54 / 74LS377 is an 8-bit register built using advanced Low Power
Schottky technology. This register consists of eight D-type flip-flops with a
buffered common clock and a buffered common clock enable.
The SN54 / 74LS378 is a 6-Bit Register with a buffered common enable.
This device is similar to the SN54 / 74LS174, but with common Enable rather
than common Master Reset.
The SN54 / 74LS379 is a 4-Bit Register with buffered common Enable. This
device is similar to the SN54 / 74LS175 but features the common Enable
rather then common Master Reset.
• 8-Bit High Speed Parallel Registers
• Positive Edge-Triggered D-Type Flip Flops
• Fully Buffered Common Clock and Enable Inputs
• True and Complement Outputs
• Input Clamp Diodes Limit High Speed Termination Effects
PIN NAMES
LOADING (Note a)
HIGH
LOW
E
Enable (Active LOW) Input
0.5 U.L.
0.25 U.L.
D0 – D3
CP
Data Inputs
Clock (Active HIGH Going Edge) Input
0.5 U.L.
0.5 U.L.
0.25 U.L.
0.25 U.L.
Q0 – Q3
Q0 – Q3
True Outputs (Note b)
Complemented Outputs (Note b)
10 U.L.
10 U.L.
5 (2.5) U.L.
5 (2.5) U.L.
NOTES:
a) 1 TTL Unit Load (U.L.) = 40 µA HIGH/1.6 mA LOW.
b) The Output LOW drive factor is 2.5 U.L. for Military (54) and 5 U.L. for Commercial
(74) Temperature Ranges.
SN54/74LS377
SN54/74LS378
SN54/74LS379
OCTAL D FLIP-FLOP WITH
ENABLE; HEX D FLIP-FLOP
WITH ENABLE; 4-BIT D FLIP-FLOP
WITH ENABLE
LOW POWER SCHOTTKY
20
1
20
1
20
1
16
1
J SUFFIX
CERAMIC
CASE 732-03
N SUFFIX
PLASTIC
CASE 738-03
DW SUFFIX
SOIC
CASE 751D-03
J SUFFIX
CERAMIC
CASE 620-09
16
1
N SUFFIX
PLASTIC
CASE 648-08
16
1
D SUFFIX
SOIC
CASE 751B-03
ORDERING INFORMATION
SN54LSXXXJ Ceramic
SN74LSXXXN Plastic
SN74LSXXXDW SOIC
SN74LSXXXD SOIC
FAST AND LS TTL DATA
5-533
Share Link: