UPC8110GR(2000) データシートの表示（PDF） - NEC => Renesas Technology
部品番号
コンポーネント説明
メーカー
UPC8110GR Datasheet PDF : 6 Pages
| |||
UPC8110GR
ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C)
SYMBOLS
PARAMETERS
UNITS RATINGS
VCC
Supply Voltage
V
4.0
VPS
Power Save Voltage
PD
Power Dissipation2
V
4.0
mW
430
TOP
Operating Temperature
°C
-40 to +85
TSTG
Storage Temperature
°C -55 to +150
Notes:
1. Operation in excess of any one of these parameters may result in
permanent damage.
2. Mounted on a 50 x 50 x 1.6 mm double copper clad epoxy glass
PWB (TA = +85°C).
PIN FUNCTIONS
RECOMMENDED
OPERATING CONDITIONS
SYMBOLS PARAMETERS UNITS MIN
VCC Supply Voltage
V 2.7
VPS
Power Save Voltage
V
0
TOP
Operating Temperature °C -40
PLO LO Input Power Level dBm -15
fLOIN LO Input Frequency MHz 800
fI/QIN I/Q Input Frequency MHz DC
VI/QIN I/Q Input Voltage
Notes:
1. Single-ended Input.
2. Differential Input.
mVp-p
mVp-p
TYP
3.0
+25
-10
900
MAX
3.6
VCC
+85
-7
1000
10
5001
2502
Pin No.
1
Symbol
LOIN
Supply
Voltage
(V)
—
Pin
Voltage
(V)
2.6
Description
LO input for the phase shifter.
Equivalent Circuit
1
3
2
GND
0
—
3
LOIN
—
2.6
4
GND
0
—
5
Q
VCC/2*1
—
6
Q
VCC/2*1
—
7
I
VCC/2*1
—
8
I
VCC/2*1
—
9
GND
0
—
10
11
RFOUT
—
1.6
Connect to ground with minimum
inductance. Track length should be kept
as short as possible.
Bypass of the LO input. This pin is
grounded through a capacitor of approx.
30 pF.
Connect to ground with minimum
inductance. Track length should be kept
as short as possible.
Input for Q signal. If the I/Q input
signals are single-ended, the
maximum amplitude of the signal is
500 mVp-p.
Input for Q signal. If the I/Q input
5
signals are single-ended, Q
should be DC biased at VCC/2. If
the I/Q input signals are differen-
tial, the maximum amplitude of the
signal is 250 mVp-p.
Input for I signal. If the I/Q input
signals are single-ended, I
should be DC biased at VCC/2. If
the I/Q input signals are differen-
tial, the maximum amplitude of the
signal is 250 mVp-p.
7
Input for I signal. If the I/Q input
signals are single-ended, the
maximum amplitude of the signal
is 500 mVp-p.
Connect to ground with minimum
inductance. Track length should be kept
as short as possible.
Output from the modulator. This is an
emitter follower output. Connect approx.
15Ω in series to match to 50Ω.
6
8
11
Share Link: 