DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

UPD121W33A データシートの表示(PDF) - NEC => Renesas Technology

部品番号
コンポーネント説明
メーカー
UPD121W33A
NEC
NEC => Renesas Technology NEC
UPD121W33A Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
μ PD121WxxA Series
CIN : 0.1 μ F or higher. Be sure to connect CIN to prevent parasitic oscillation. Set this value according to the length
of the line between the regulator and the INPUT pin. Use of a film capacitor or other capacitor with first-rate
voltage and temperature characteristics is recommended. If using a laminated ceramic capacitor, it is
necessary to ensure that CIN is 0.1 μ F or higher for the voltage and temperature range to be used.
COUT : 10 μ F or higher. Be sure to connect COUT to prevent oscillation and improve excessive load regulation. Place
CIN and COUT as close as possible to the IC pins (within 1 to 2 cm). Also, in case of using a laminated ceramic
capacitor, please note following items.
It is necessary to ensure that COUT is 10 μ F or higher for the voltage and temperature range to be used.
In case of using laminated ceramic capacitor, it is easy to become state of parasitic oscillation. Because
ESR of laminated ceramic capacitor is very low. Therefore, the capacitor and load condition (output current)
which fulfill the condition of the stable operation area of ESR shown below are recommended.
Stable Operation Area as below is regulated under condition of which this product is not on a substrate.
Therefore impedance on substrate is not considered.
D1 : If the OUTPUT pin has a higher voltage than the INPUT pin, connect a diode.
D2 : If the OUTPUT pin has a lower voltage than the GND pin, connect a Schottky barrier diode.
R1, R2: The total amount of R1 and R2 is sure to below 500 kΩ (375 kΩ TYP.). R2 = 100 kΩ is recommended.
VOUT = (1 + R1/R2) VADJ Note
Note When VOUT = 3.0 V: R1 = 275 kΩ, R2 = 100 kΩ
Caution Make sure that no external voltage is applied to the OUTPUT pin.
μ PD121WxxA Series COUT ESR Stable Operation Area
Unstable Operation Area
10
1
Stable Operation Area
0.1
Unstable Operation Area
0.01
0
150 300 450 600 750 900 1050 1200 1350 1500
IO (mA)
Data Sheet G18852EJ1V0DS
5

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]