UPD121A10 データシートの表示（PDF） - NEC => Renesas Technology

部品番号

コンポーネント説明

メーカー

UPD121A10

2-POWER SUPPLY INPUT METHOD 1.0 V/2.0 A REGULATOR

NEC => Renesas Technology 

μ PD121A10

RECOMMENDED MOUNTING CONDITIONS

The μ PD121A10 should be soldered and mounted under the following recommended conditions.

For soldering methods and conditions other than those recommended below, contact an NEC Electronics sales

representative.

For technical information, see the following website.

Semiconductor Device Mount Manual (http://www.necel.com/pkg/en/mount/index.html)

μ PD121A10T1F-AT Note: 5-PIN TO-252 (5-PIN MP-3ZK)

Process

Conditions

Infrared reflow

Partial Heating Method

Package peak temperature: 260°C, Time: 60 seconds MAX. (at 220°C or higher),

Count: Three times,

Flux: Rosin flux with low chlorine (0.2 Wt% or below) recommended.

Pin temperature: 350°C or below,

Heat time: 3 seconds or less (per each side of the device).

Note Pb-free (This product does not contain Pb in the external electrode and other parts.)

Symbol

IR60-00-3

P350

Caution Apply only one kind of soldering condition to a device, except for "partial heating method", or the

device will be damaged by heat stress.

REFERENCE DOCUMENTS

USER’S MANUAL USAGE OF THREE TERMINAL REGULATORS

INFORMATION VOLTAGE REGULATOR OF SMD

SEMICONDUCTOR DEVICE MOUNT MANUAL

Document No.G12702E

Document No.G11872E

http://www.necel.com/pkg/en/mount/index.html

8

Data Sheet G18843EJ1V0DS

Share Link: