SCA-13 データシートの表示（PDF） - Stanford Microdevices
部品番号
コンポーネント説明
メーカー
SCA-13 Datasheet PDF : 6 Pages
| |||
Caution: ESD Sensitive
Appropriate precautions in handling, packaging and
testing devices must be observed.
Part Symbolization
The part will be symbolized with a C3 designator on
the top surface of the package.
Mounting Instructions
The data shown was taken on a 31 mil thick FR-4 board with
1 ounce of copper on both sides.
The board was mounted to a baseplate with 3 screws as
shown. The screws bring the top side copper temperature to
the same value as the baseplate.
1. Use 1 or 2 ounce copper, if possible.
2. Solder the copper pad on the backside of the device
package to the ground plane.
3. Use a large ground pad area with many plated through-
holes as shown.
4. If possible, use at least one screw no more than 0.2 inch
from the device package to provide a low thermal resistance
path to the baseplate of the package.
5. Thermal resistance from ground lead to screws is
2 deg. C/W.
PPrreelilmimininaarryy
SCA-13 DC-5GHz Cascadable MMIC Amplifier
Part Number Ordering Information
Part Number
Reel Size
Devices/Reel
SCA-13
7"
1000
Outline Drawing
1
2
4
3
PCB Pad Layout
522 Almanor Ave., Sunnyvale, CA 94085
Phone: (800) SMI-MMIC
6
http://www.stanfordmicro.com
EDS-101393 Rev A
Share Link: 