US203 データシートの表示（PDF） - Unisonic Technologies

部品番号

コンポーネント説明

メーカー

US203

HIGH-SIDE POWER SWITCHES WITH FLAG

Unisonic Technologies 

US203

 TYPICAL APPLICATION CIRCUIT

CMOS IC

Note: A low-ESR 150µF aluminum electrolytic or tantalum between VOUT and GND is strongly recommended to meet

the 330mV maximum droop requirement in the hub VBUS. (see Application Information Section for further

details)

UTC assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other

parameters) listed in products specifications of any and all UTC products described or contained herein.

UTC products are not designed for use in life support appliances, devices or systems where malfunction

of these products can be reasonably expected to result in personal injury. Reproduction in whole or in

part is prohibited without the prior written consent of the copyright owner. UTC reserves the right to

make changes to information published in this document, including without limitation specifications and

product descriptions, at any time and without notice. This document supersedes and replaces all

information supplied prior to the publication hereof.

UNISONIC TECHNOLOGIES CO., LTD

www.unisonic.com.tw

7 of 7

QW-R502-435.K

Share Link: