VRE104 データシートの表示（PDF） - Cirrus Logic
部品番号
コンポーネント説明
メーカー
VRE104 Datasheet PDF : 5 Pages
| |||
VRE104
Product Innovation From
4. APPLICATION INFORMATION
The proper connection of the VRE104 series voltage references is shown below with the optional trim resistors. Pay
careful attention to the circuit layout to avoid noise pickup and voltage drops in the lines.
The VRE104 series voltage references have the ground terminal brought out on two pins (pin 6 and pin 7) which
are connected together internally. This allows the user to achieve greater accuracy when using a socket. Voltage
references have a voltage drop across their power supply ground pin due to quiescent current flowing through the
contact resistance. If the contact resistance was constant with time and temperature, this voltage drop could be
trimmed out. When the reference is plugged into a socket, this source of error can be as high as 20 ppm. By con-
necting pin 7 to the power supply ground and pin 6 to a high impedance ground point in the measurement circuit,
the error due to the contact resistance can be eliminated. If the unit is soldered into place, the contact resistance is
sufficiently small that it does not effect performance.
VRE104 Used With Crystal Semiconductor ADC
Suggested Reading: Crystal Semiconductor Application Note -
“Voltage References for the CS501X/CS25IIX Series of A/D Converters"
EXTERNAL CONNECTIONS
1. Optional Fine Adjust for approximately ±10mV.
PIN CONFIGURATION
TOP VIEW
NC
NC
NC
NC
NC
REF. GND
GND
VRE104
FINE ADJ.
+4.5V
FINE ADJ.
+PS
NC
NC
NC
4
VRE104DS
Share Link: 