W986416DH データシートの表示（PDF） - Winbond

部品番号

コンポーネント説明

メーカー

W986416DH

1M x 4 BANKS x 16 BITS SDRAM

Winbond 

W986416DH

No Operation Command

The No Operation Command should be used in cases when the SDRAM is in a idle or a wait state to

prevent the SDRAM from registering any unwanted commands between operations. A No Operation

Command is registered when CS is low with RAS , CAS , and WE held high at the rising

edge of the clock. A No Operation Command will not terminate a previous operation that is still

executing, such as a burst read or write cycle.

Deselect Command

The Deselect Command performs the same function as a No Operation Command. Deselect

Command occurs when CS is brought high, the RAS , CAS , and WE signals become don't

cares.

Clock Suspend Mode

During normal access mode, CKE must be held high enabling the clock. When CKE is registered low

while at least one of the banks is active, Clock Suspend Mode is entered. The Clock Suspend mode

deactivates the internal clock and suspends any clocked operation that was currently being executed.

There is a one clock delay between the registration of CKE low and the time at which the SDRAM

operation suspends. While in Clock Suspend mode, the SDRAM ignores any new commands that are

issued. The Clock Suspend mode is exited by bringing CKE high. There is a one clock cycle delay

from when CKE returns high to when Clock Suspend mode is exited.

- 11 -

Publication Release Date: April 11, 2002

Revision A4

Share Link: