Z2C100RG10 データシートの表示（PDF） - Superworld Electronics

部品番号

コンポーネント説明

メーカー

Z2C100RG10

Ferrite Chip Bead

Superworld Electronics 

Ferrite Chip Bead – Z2 Series

Z2C471‐RB‐10

P6

Z2C601‐RB‐10

8. Soldering:

Mildly activated rosin fluxes are preferred. Our terminations are suitable for all re-flow soldering systems. If hand

soldering cannot be avoided, the preferred technique is the utilization of hot air soldering tools.

Note:

If wave soldering is used, there will be some risk

Reflow soldering temperatures below 240°C, there will be non-wetting risk

8-1 Solder Re-flow:

Recommended temperature profiles for re-flow soldering in Figure 1.

8-2 Soldering Iron (Figure 2):

Products attachment with soldering iron is discouraged due to the inherent process control limitations.

In the event that a soldering iron must be employed the following precautions are recommended.

Note :

a) Preheat circuit and products to 150°C.

b) 350°C tip temperature (Max.)

c) Never contact the ceramic with the iron tip

d) 1.0mm tip diameter (Max.)

e) Use a 20 watt soldering iron with tip diameter of 1.0mm

f) Limit soldering time to 4~5 secs.

NOTE: Specifications subject to change without notice. Please check our website for latest information.

Proprietary and Confidential

Document of Superworld

14/09/2017

Share Link: