ZXSC100 データシートの表示（PDF） - Diodes Incorporated.
部品番号
コンポーネント説明
メーカー
ZXSC100 Datasheet PDF : 17 Pages
| |||
ZXSC100
OTHER APPLICATIONS
VBATT
L1
100µH
U1
EM
VDRIVE
BAS ISENSE
RE
FB
VCC
GND
ZXSC100
Q1
FMMT617
D1
WHITE LED
R2
0.22R
Driving white LED’s in a flashlight application
The ZXSC100 solution is ideal for LED lamp driving
applications operating from a single cell. In principal
conversion from 1.2V to the 3.6V, typically required by
white LEDs, is necessary. Load currents in the region of
20mA to 50mA being required for a single LED element.
To minimise size, weight and cost, single cell operation
is an advantage. The ZXSC is well matched to single cell
NiCd and NiMH characteristics. The circuit will turn on at
1.06V, to maximise the life the battery can offer, the
converter does not turn off until the battery voltage falls
to 0.93V.
The circuit itself is very simple, a minimum number
of components are used and they are all small size.
The ZXSC uses the very small MSOP8 package, the
pass transistor is SOT23. No capacitors are required
as the circuit is stable under all conditions. The
inductor recommended is a low cost miniature
component.
No compromise is made on efficiency however. In a
standard configuration efficiency well over 80% can
be achieved. With careful inductor selection
efficiency over 90% is possible.
The inherent flexibility of the ZXSC circuit means
that parallel or series LEDs can be driven depending
on application needs. A simple modification to the
application circuit means that the maximum pulse
current can be programmed to match the
characteristics of the chosen LED load, pulse current
in the range 10mA to 3A and beyond can be easily
achieved.
An application note (AN33) is available describing
various circuits for driving white LEDs. This
application note includes details of circuits that
optimise battery life, maximise brightness and can
be constructed for minimal cost. Contact your local
Zetex office for further details.
ISSUE 3 - JANUARY 2004
9
SEMICONDUCTORS
Share Link: 