TRG100A データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

メーカー

TRG100A

100W SWITCHING ADAPTER WITH PFC

Unspecified 

Specifications

TRG100A Series Derating Curve

INPUT SPECIFICATIONS:

Voltage …...………........….................................................... 90~264Vac

Frequency ………………………………………….……………..... 47 to 63Hz

Inrush Current ………………….………….................... 120A max. @240Vac

Conducted EMI ………………………….………………CISPR/FCC Class B

Leakage Current …………………………………………….…… 3.5mA max.

OUTPUT SPECIFICATIONS:

Holdup Time ……………………………………………… 20ms typ. @115Vac

Short Circuit Protection ………………………….……………… Continuous

Over Voltage Protection ……………..........................................….....… Yes

GENERAL SPECIFICATIONS:

Isolation ………………………………………… Input to output = 4,242VDC

Operating Temperature ........................................................... 0 ~ 40℃

Storage Temperature ……………………………...….......….... -20~85℃

Cooling …………………………………..……………….. Natural Convection

Switching Frequency …………………………………………… 45KHz Typical

Dimensions ……..…. 5.906x2.756x1.378 inches (150.00x70.00x35.00 mm)

Weight ……………………………………………………… 600g(1.36 Pounds)

AC Inlet ……………….…………………………………...……… IEC320/C14

SAFETY AND EMC:

Emission and lmmunity ……… EN55022 Class B, FCC Part 15 Class B

EN61000-3-2,EN61000-3-3, EN55024

EN61204-3

Safety ………………………..IEC60950-1, EN60950-1, UL60950-1

100%

75%

50%

25%

0%

0

20LFM(Natural Convection)

10

20

30

40

50

60

Ambient Temperature(oC)

NOTE:

1. Voltage setpoint at 60% full load

2. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for

Ripple & Noise measurement @20MHz BW.

3. Line regulation measured from 100Vac to 240Vac with full load.

4. Load regulation measured from 60% to 100% full load and from 60% to

20% full load (60% +/- 40% full load)

5. ”Various TRG Series adapters are PSE certified. PSE certification

alone is not sufficient for importation into Japan. A valid PSE mark

must contain the name of the importer as shown in the example below.

If PSE mark is required, the name of the registered importer must be

supplied to Cincon on order placement. Product labels will not contain

PSE mark if importer name is not supplied. Consult factory or local

representative for details”

Mechanical Specification

All Dimensions are in inches(mm)

Tolerance:Inches:X.XXX±0.02

Millimeters:X.XX±0.5

UNIT:inches(mm)

LED

IEC320/C14

DC Plug type: V+ ─●)─ V-

DC Plug:Right Angle(ψ5.5／ψ2.5) L12mm

16AWG／1800mm

Typical at 25˚C, nominal line and 60% load, unless otherwise Specified

2

Share Link: