24AA01-E/LT データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

メーカー

24AA01-E/LT

1K I2C™ Serial EEPROM

Unspecified 

24AA01/24LC01B

1.0 ELECTRICAL CHARACTERISTICS

Absolute Maximum Ratings (†)

VCC.............................................................................................................................................................................6.5V

All inputs and outputs w.r.t. VSS ......................................................................................................... -0.3V to VCC +1.0V

Storage temperature ...............................................................................................................................-65°C to +150°C

Ambient temperature with power applied ................................................................................................-40°C to +125°C

ESD protection on all pins ......................................................................................................................................................≥ 4 kV

† NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to

the device. This is a stress rating only and functional operation of the device at those or any other conditions

above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating

conditions for extended periods may affect device reliability.

TABLE 1-1: DC CHARACTERISTICS

DC CHARACTERISTICS

Industrial (I): TA = -40°C to +85°C, VCC = +1.7V to +5.5V

Automotive (E): TA = -40°C to +125°C, VCC = +2.5V to +5.5V

Param.

No.

Sym.

Characteristic

Min.

D1

VIH

WP, SCL and SDA pins

—

D2

—

High-level input voltage 0.7 VCC

D3

VIL

Low-level input voltage

—

D4

VHYS

Hysteresis of Schmitt

0.05 VCC

Trigger inputs

D5

VOL

Low-level output voltage

—

D6

ILI

Input leakage current

—

D7

ILO

Output leakage current —

D8

CIN,

Pin capacitance

—

COUT (all inputs/outputs)

D9

ICC write Operating current

—

D10 ICC read

—

D11 ICCS

Standby current

—

—

Typ.

—

—

—

—

—

—

—

—

0.1

0.05

0.01

—

Max.

—

—

0.3 VCC

—

0.40

±1

±1

10

3

1

1

5

Note: This parameter is periodically sampled and not 100% tested.

Units

Conditions

——

V—

V—

V (Note)

V IOL = 3.0 mA, VCC = 2.5V

μA VIN = VSS or VCC

μA VOUT = VSS or VCC

pF VCC = 5.0V (Note)

TA = 25°C, FCLK = 1 MHz

mA VCC = 5.5V, SCL = 400 kHz

mA —

μΑ Industrial

μΑ Automotive

SDA = SCL = VCC

WP = VSS

DS21711J-page 2

© 2009 Microchip Technology Inc.

Share Link: