DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

74HC4053-Q100 データシートの表示(PDF) - NXP Semiconductors.

部品番号
コンポーネント説明
メーカー
74HC4053-Q100
NXP
NXP Semiconductors. NXP
74HC4053-Q100 Datasheet PDF : 30 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
74HC4053-Q100; 74HCT4053-Q100
Triple 2-channel analog multiplexer/demultiplexer
Rev. 2 — 22 November 2012
Product data sheet
1. General description
The 74HC4053-Q100; 74HCT4053-Q100 is a high-speed Si-gate CMOS device and is pin
compatible with Low-power Schottky TTL (LSTTL). It is specified in compliance with
JEDEC standard no. 7A.
The 74HC4053-Q100; 74HCT4053-Q100 is triple 2-channel analog
multiplexer/demultiplexer with a common enable input (E). Each multiplexer/demultiplexer
has two independent inputs/outputs (nY0 and nY1), a common input/output (nZ) and three
digital select inputs (Sn). With E LOW, one of the two switches is selected
(low-impedance ON-state) by S1 to S3. With E HIGH, all switches are in the
high-impedance OFF-state, independent of S1 to S3.
VCC and GND are the supply voltage pins for the digital control inputs (S0 to S2, and E).
The VCC to GND ranges are 2.0 V to 10.0 V for 74HC4053-Q100, and 4.5 V to 5.5 V for
74HCT4053-Q100. The analog inputs/outputs (nY0 to nY1, and nZ) can swing between
VCC as a positive limit and VEE as a negative limit. VCC VEE may not exceed 10.0 V.
For operation as a digital multiplexer/demultiplexer, VEE is connected to GND (typically
ground).
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1)
Specified from 40 C to +85 C and from 40 C to +125 C
Wide analog input voltage range from 5 V to +5 V
Low ON resistance:
80 (typical) at VCC VEE = 4.5 V
70 (typical) at VCC VEE = 6.0 V
60 (typical) at VCC VEE = 9.0 V
Logic level translation: to enable 5 V logic to communicate with 5 V analog signals
Typical ‘break before make’ built-in
ESD protection:
MIL-STD-883, method 3015 exceeds 2000 V
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )
CDM AEC-Q100-011 revision B exceeds 1000 V
Multiple package options

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]