29F128G08CKABA データシートの表示（PDF） - Micron Technology

部品番号

コンポーネント説明

メーカー

29F128G08CKABA

Asynchronous/Synchronous NAND NAND Flash Memory / 52-pad LGA / 48-pin TSOP / 100-ball BGA

Micron Technology 

Micron Confidential and Proprietary

32Gb, 64Gb, 128Gb, 256Gb Asynchronous/Synchronous NAND

Features

NAND Flash Memory

MT29F32G08CBABA, MT29F64G08C[E/F]ABA, MT29F128G08C[J/K/M]ABA,

MT29F256G08CUABA, MT29F32G08CBABB, MT29F32G08CBCBB,

MT29F64G08CFABB, MT29F64G08CECBB, MT29F128G08CJABB,

MT29F128G08C[K/M]CBB, MT29F256G08CUCBB

Features

• Open NAND Flash Interface (ONFI) 2.1-compliant1

• Multiple-level cell (MLC) technology

• Organization

– Page size x8: 4320 bytes (4096 + 224 bytes)

– Block size: 256 pages (1024K + 56K bytes)

– Plane size: 2 planes x 2048 blocks per plane

– Device size: 32Gb: 4096 blocks;

64Gb: 8192 blocks;

128Gb: 16,384 blocks;

256Gb: 32,768 blocks

• Synchronous I/O performance

– Up to synchronous timing mode 4

– Clock rate: 12ns (DDR)

– Read/write throughput per pin: 166 MT/s

• Asynchronous I/O performance

– Up to asynchronous timing mode 4

– tRC/tWC: 25ns (MIN)

• Array performance

– Read page: 50µs (MAX)

– Program page: 900µs (TYP)

– Erase block: 3ms (TYP)

• Operating Voltage Range

– VCC: 2.7–3.6V

– VCCQ: 1.7–1.95V, 2.7–3.6V

• Command set: ONFI NAND Flash Protocol

• Advanced Command Set

– Program cache

– Read cache sequential

– Read cache random

– One-time programmable (OTP) mode

– Multi-plane commands

– Multi-LUN operations

– Read unique ID

– Copyback

• First block (block address 00h) is valid when ship-

ped from factory. For minimum required ECC, see

Error Management (page 108).

• RESET (FFh) required as first command after power-

on

• Operation status byte provides software method for

detecting

– Operation completion

– Pass/fail condition

– Write-protect status

• Data strobe (DQS) signals provide a hardware meth-

od for synchronizing data DQ in the synchronous

interface

• Copyback operations supported within the plane

from which data is read

• Quality and reliability

– Data retention: 10 years

– Endurance: 5000 PROGRAM/ERASE cycles

• Operating temperature:

– Commercial: 0°C to +70°C

– Industrial (IT): –40ºC to +85ºC

• Package

– 52-pad LGA

– 48-pin TSOP

– 100-ball BGA

Note: 1. The ONFI 2.1 specification is available at

www.onfi.org.

PDF: 09005aef836c9ded

Rev. F 12/09 EN

1

Micron Technology, Inc. reserves the right to change products or specifications without notice.

© 2008 Micron Technology, Inc. All rights reserved.

Products and specifications discussed herein are subject to change by Micron without notice.

Share Link: