SMA02070C8259FD500 データシートの表示（PDF） - Vishay Semiconductors

部品番号

コンポーネント説明

メーカー

SMA02070C8259FD500

Professional Thin Film Leaded Resistors

Vishay Semiconductors 

MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional

Professional Thin Film Leaded Resistors

Vishay Beyschlag

TESTS AND REQUIREMENTS

Essentially all tests are carried out in accordance with the

following specifications:

EN 60115-1, generic specification (includes tests)

EN 140100, sectional specification (includes schedule for

qualification approval)

EN 140101-806 (successor of CECC 40101-806), detail

specification (includes schedule for conformance inspection)

The Test and Requirements table contains only the most

important tests. For the full test schedule refer to the

documents listed above. The testing also covers most of the

requirements specified by EIA/IS-703 and JIS-C-5202.

The tests are carried out in accordance with IEC 60068-2-xx

test method and under standard atmospheric conditions in

accordance with IEC 60068-1, 5.3. Climatic category

LCT/UCT/56 (rated temperature range: Lower category

temperature, upper category temperature; damp heat,

steady state, test duration: 56 days) is valid.

Unless otherwise specified the following values apply:

Temperature: 15 °C to 35 °C

Relative humidity: 45 % to 75 %

Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).

For performing some of the tests, the components are

mounted on a test board in accordance with IEC 60115-1,

4.31.

In Test Procedures and Requirements table, only the tests

and requirements are listed with reference to the relevant

clauses of IEC 60115-1 and IEC 60068-2-xx test methods. A

short description of the test procedure is also given.

TEST PROCEDURES AND REQUIREMENTS

IEC

60115-1

CLAUSE

IEC

60068-2-

TEST

METHOD

TEST

PROCEDURE

Stability for product

types:

MBA/SMA 0204

MBB/SMA 0207

MBE/SMA 0414

4.5

-

Resistance

4.8

-

Temperature At (20/LCT/20) °C and

coefficient

(20/UCT/20) °C

-

Endurance

at 70 C:

Standard

operation mode

U = P70 x R or

U = Umax.;

1.5 h ON; 0.5 h OFF

70 °C; 1000 h

4.25.1

70 °C; 8000 h

-

Endurance

at 70 C:

Long term

operation mode

U = P70 x R or

U = Umax.;

1.5 h ON; 0.5 h OFF

70 °C; 1000 h

70 °C; 8000 h

4.25.3

Endurance at

125 °C; 1000 h



upper category

temperature

155 °C; 1000 h

4.24

78 (Cab)

Damp heat,

steady state

(40 ± 2) °C; 56 days;

(93 ± 3) % RH

REQUIREMENTS

PERMISSIBLE CHANGE (R max.)

STABILITY

CLASS 0.5

STABILITY

CLASS 1

1  to 332 k

0.22  to < 1 

1  to 1 M

0.22  to < 1 

1  to 2.4 M

0.22  to < 1 

± 5 % R; ± 1 % R; ± 0.5 % R

± 50 ppm/K; ± 25 ppm/K

STABILITY

CLASS 2

> 332 k

> 1 M

> 2.4 M

± (0.5 % R + 0.05) (1)

± (1 % R + 0.05) (2)

± 0.5 % R

± 1 %R

± (0.25 % R + 0.05) (3)

± (0.5 % R + 0.05) (4)

± (0.25 % R + 0.05 ) ± (0.5 % R + 0.05 )

± (0.5 % R + 0.05 ) ± (1 % R + 0.05 )

± (0.5 % R + 0.05 ) ± (1 % R + 0.05 )

± 0.25 % R

± 0.5 % R

± 1 %R

± 2 %R

± 2 %R

Document Number: 28766

For technical questions, contact: filmresistorsleaded@vishay.com

www.vishay.com

Revision: 03-Dec-12

31

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.

THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT\rARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Share Link: