ENC28J60-H データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

メーカー

ENC28J60-H

ENC28J60-H development board Users Manual

Unspecified 

INTRODUCTION

ENC28J60-H is world’s smallest Ethernet controller development board with it’s

size of only 30x24 mm. It provides easy connection to any microcontroller with only

few ports via SPI which makes it perfect for adding Ethernet connectivity to

embedded applications.

BOARD FEATURES

–

ENC28J60 10 Mbit Ethernet controller

–

on-board RJ45 connector with build in Ethernet transformer and two status

LEDs

–

easy interface to any microcontroller via SPI

–

compact size in DIL 10 pin format, the distance between pin rows is 0.8”

–

PCB: FR-4, 1.5 mm (0,062"), soldermask, white silkscreen component print

–

Dimensions: 30x24 mm (1.18x0.95")

ELECTROSTATIC WARNING

The ENC28J60-H board is shipped in protective anti-static packaging. The board

must not be subject to high electrostatic potentials. General practice for working

with static sensitive devices should be applied when working with this board.

Ethernet Controller Features

ENC28J60-H board use ENC28J60 stand-alone ethernet controller with these

features:

– IEEE 802.3. Compatible Ethernet Controller

– Fully Compatible with 10/100/1000Base-T Networks

– Integrated MAC and 10Base-T PHY

– Supports One 10Base-T Port with Automatic Polarity Detection and Correction

– Supports Full and Half-Duplex modes

– Programmable Automatic Retransmit on Collision

– Programmable Padding and CRC Generation

– Programmable Automatic Rejection of Erroneous Packets

– SPI Interface with Clock Speeds Up to 20 MHz

Page 2

Share Link: