RF3160 データシートの表示（PDF） - RF Micro Devices
部品番号
コンポーネント説明
メーカー
RF3160 Datasheet PDF : 8 Pages
| |||
RF3160
Preliminary
Pin Function Description
Interface Schematic
1
GND
Connects to module backside ground.
2
DCS IN RF input to the DCS band. This is a 50Ω input, external DC-blocking
capacitor required. See application schematic.
3
GND
Connects to module backside ground.
4
GSM IN RF input to the GSM band. This is a 50Ω input. No external DC-block-
2
ing capacitor required. See application schematic.
5
GND
Connects to module backside ground.
6
VCC
Power supply for stages 1 and 2 of both the GSM and DCS power
amplifiers. External low frequency bypassing capacitor required. See
application schematic.
7
GND
Connects to module backside ground.
8
VCC
Power supply for output stages of both the GSM and DCS power ampli-
fiers. External low frequency bypassing capacitor required. See appli-
cation schematic.
9
GND
Connects to module backside ground.
10
GSM OUT RF output for the GSM band. This is a 50Ω output. External DC-block-
ing capacitor required. See application schematic.
11
GND
Connects to module backside ground.
12
DCS OUT RF output for the DCS band. This is a 50Ω output. External DC-block-
ing capacitor required. See application schematic.
13
GND
Connects to module backside ground.
14
VAPC
Single input analog power control voltage for the GSM and DCS band.
15
GND
Connects to module backside ground.
16
BAND
Logic low (GSM enable) or logic high (DCS enable) provides single IO
SELECT band selection.
Pkg
GND
Module backside ground.
Base
2-264
Rev A4 010420
Share Link: 