AD680JR データシートの表示（PDF） - Analog Devices
部品番号
コンポーネント説明
メーカー
AD680JR Datasheet PDF : 12 Pages
| |||
OUTLINE DIMENSIONS
5.00 (0.1968)
4.80 (0.1890)
8
4.00 (0.1574)
3.80 (0.1497) 1
5
6.20 (0.2440)
4 5.80 (0.2284)
0.25 (0.0098)
1.27 (0.0500)
BSC
1.75 (0.0688)
1.35 (0.0532)
0.50 (0.0196) × 45°
0.25 (0.0099)
0.10 (0.0040)
0.51 (0.0201)
COPLANARITY
0.10
SEATING
PLANE
0.31 (0.0122)
8°
0.25 (0.0098) 0° 1.27 (0.0500)
0.17 (0.0067) 0.40 (0.0157)
COMPLIANT TO JEDEC STANDARDS MS-012AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
Figure 21. 8-Lead Standard Small Outline Package [SOIC]
Narrow Body
(R-8)
Dimensions show in millimeters and (inches)
AD680
0.400 (10.16)
0.365 (9.27)
0.355 (9.02)
8
5
PIN 1
0.210
(5.33)
MAX
0.150 (3.81)
0.130 (3.30)
0.115 (2.92)
1
4
0.100 (2.54)
BSC
0.022 (0.56)
0.018 (0.46)
0.014 (0.36)
0.070 (1.78)
0.060 (1.52)
0.045 (1.14)
0.280 (7.11)
0.250 (6.35)
0.240 (6.10)
0.060 (1.52)
MAX
0.015
(0.38) 0.015 (0.38)
MIN
GAUGE
PLANE
SEATING
PLANE
0.005 (0.13)
MIN
0.325 (8.26)
0.310 (7.87)
0.300 (7.62)
0.195 (4.95)
0.130 (3.30)
0.115 (2.92)
0.430 (10.92)
MAX
0.014 (0.36)
0.010 (0.25)
0.008 (0.20)
COMPLIANT TO JEDEC STANDARDS MS-001-BA
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
CORNER LEADS MAY BE CONFIGURED AS WHOLE OR HALF LEADS.
Figure 22. 8-Lead Plastic Dual In-Line Package [PDIP]
Narrow Body
(N-8)
Dimensions shown in inches and (millimeters)
0.210 (5.33)
0.170 (4.32)
0.205 (5.21)
0.175 (4.45)
0.135 (3.43)
MIN
0.050 (1.27)
MAX
0.019 (0.482)
0.016 (0.407)SQ
0.500 (12.70) MIN
SEATING
PLANE
0.055 (1.40)
0.045 (1.15)
0.165 (4.19)
0.125 (3.18)
3
2
0.105 (2.66)
0.095 (2.42)
0.115 (2.92)
0.080 (2.03)
1
0.115 (2.92)
0.080 (2.03)
BOTTOM VIEW
COMPLIANT TO JEDEC STANDARDS TO-226AA
CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN
Figure 23. 3-Pin Plastic Header-Style Package [TO-92]
(T-3)
Dimensions shown in inches and (millimeters)
Rev. H | Page 11 of 12
Share Link: 