ADG1409YCPZ-REEL7(Rev0) データシートの表示（PDF） - Analog Devices
部品番号
コンポーネント説明
メーカー
ADG1409YCPZ-REEL7
(Rev.:Rev0)
(Rev.:Rev0)
Analog Devices
ADG1409YCPZ-REEL7 Datasheet PDF : 20 Pages
| |||
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 5.
Parameter
VDD to VSS
VDD to GND
VSS to GND
Analog Inputs, Digital Inputs1
Continuous Current, S or D
Peak Current, S or D (Pulsed at 1 ms,
10% Duty Cycle Maximum)
Operating Temperature Range
Industrial (Y Version)
Storage Temperature Range
Junction Temperature
Reflow Soldering Peak
Temperature (Pb-Free)
Rating
35 V
−0.3 V to +25 V
+0.3 V to −25 V
VSS − 0.3 V to VDD + 0.3 V or
30 mA, whichever occurs first
30 mA
100 mA
−40°C to +125°C
−65°C to +150°C
150°C
260(+0/−5)°C
1 Overvoltages at A, EN, S, or D are clamped by internal diodes. Current should
be limited to the maximum ratings given.
ADG1408/ADG1409
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those listed in the operational sections
of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Only one absolute maximum rating can be applied at any one time.
THERMAL RESISTANCE
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 6. Thermal Resistance
Package Type
θJA
θJC
16 Lead TSSOP
150.4 50
16-Lead LFCSP_VQ
30.4
Unit
°C/W
°C/W
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. 0 | Page 9 of 20
Share Link: