AEV23024 データシートの表示（PDF） - Panasonic Corporation

部品番号

コンポーネント説明

メーカー

AEV23024

COMPACT BUT CUT OFF DC POWER CURRENT, POWER CAPSULE CONTACT RELAY.

Panasonic Corporation 

COMPACT BUT CUT OFF DC

EV-RELAYS POWER CURRENT, POWER

CAPSULE CONTACT RELAY.

150A 2a

60a

150A 1a

30a

FEATURES

• Small size & light weight: size 1/4,

weight 1/2(compared to conventional

contactors)

• No arc space is required: size includ-

ing arc space 1/9 (compared to con-

ventional contactors)

The arc is not exposed to the outside,

therefore, no arc space is not required.

• Safety construction

The arc is not exposed, therefore, the

contactor is explosion proof and intrinsi-

cally safe.

• Quiet: operation noise 1/4 (compared

to conventional contactors).

Along with the above-mentioned miniatur-

ization, the operation noise has been re-

duced to 70dB, and, in addition, the

operation noise remains unchanged

when a current of 1000A or more is inter-

rupted.

• High contact reliability

The contact part is hermetically sealed

with H2 mixed gas, hence the contact re-

sistance remains stable regardless of the

ambient conditions.

• Mounting direction is not specified

The weight of the movable parts is light,

and also the restoring force is large,

hence the contactor is relatively unaffect-

ed by gravity.

• Line-up of indicator Type (150A Type

only)

A line-up of relays with indicator that can

monitor the relay operation.

SPECIFICATIONS

Contact

Type

Arrangement

Rating

Nominal switching capacity

(resistive load)

Short term current

Max. cut-off current

Overload opening/closing rating

Contact voltage drop (Max.)

Nominal operating power

Expected life

Mechanical

(min. operations) Electrical

150A type

1 Form A, 2 Form A

150A 400V DC

300A (10min) (40mm2)

2,500A 300V DC (3 cycles)#1

600A 300V DC (25 cycles)

0.1V (When current (is 150A

per 1) contact set)

35W (Inrush, approx 0.1s)

5W (Stable)

1 Form A: 105

2 Form A: 5 × 104

150A 400V DC 103

L/R q 1ms

60A type

1 Form A

60A 400V DC

120A (15min) (15mm2)

600A 300V DC (5 cycles)

120A 400V DC (50 cycles)

0.1V (When current (is 60A

per 1) contact set)

Max. 5W

30A type

1 Form A

30A 400V DC

60A (5min) (5.5mm2)

—

120A 400V DC (50 cycles)

0.2V (When current (is 30A

per 1) contact set)

Max. 5W

60A 400V DC 103

L/R q 1ms

105

30A 400V DC 3 × 104

L/R q 1ms

Characteristics

Initial insulation resistance

Initial

breakdown voltage

Between open contacts

Between contact and coil

Operate time (at 20°C) (at nominal voltage)

Reset time (without diode) (at 20°C) (at nominal voltage)

Shock resistance

Functional

Destructive

Vibration resistance

Functional

Destructive

Conditions for operation, transport and storage Ambient temperature

(Not freezing and condensing at low temperature) Humidity

Unit weight

Min. 100 MΩ (at 500 V DC)*1

AC 2,500 Vrms for 1 min.*2

AC 2,500 Vrms for 1 min.*2

Max. 50ms*3

Max. 30ms*4

Min. 196 m/s2 {20 G}*5

Min. 490 m/s2 {50 G}*6

43 m/s2 {4.4 G} 10 to 200Hz*7

43 m/s2 {4.4 G} 10 to 200 Hz*8

–40°C to +80°C –40°F to +176°F*9

5 to 85% R.H.

150 A 1 Form A: 660 g 21.16oz 150 A 2 Form A: 1,100 g 38.80oz

60 A: 330 g 11.64oz 30 A: 310 g 10.93oz

Remarks

* Specifications will vary with foreign standards certification ratings.

*1 Measurement at same location as "Initial breakdown voltage" section.

*2 Detection current: 10mA.

*3 Nominal voltage applied to the coil,excluding bounce time.

*4 Nominal voltage applied to the coil.

*5 Half-wave pulse of sine wave: 11 ms; detection time: 10µs.

*6 Half-wave pulse of sine wave: 6 ms.

*7 Detection time: 10 µs.

*8 3 directions, each 4 hours.

*9 Storage: Max.85°C 185°F.

Notes:

Same specifications as the 12 V type.

#1 Condition: Nominal switching 100cycles, each cut off 2,500A

346

Share Link: